Discussion Locked

Remove WINDOWS 2000

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can some one tell how to uninstall win2k from your your Computer, after installing it as a Dual boot. I am running windows ME and win2k. I hsve it installed on one partition amd it in the WIN ME Windows as WNNT.

7 replies

by dmiles

The simple way is to boot from a Windows 9X Floppy Boot Disk,and do a quick on the partition where the operating system is installed e.g.Format C /Q
If Win 2K is on an NTFS partition you will need to Fdisk to delete the partition,under fdisk NTFS is shown as unknown partition
To remove from a FAT/FAT32 partition,boot from a Windows 9X Boot Disk,and manually delete the boot files, on the C:\partition
Files Win 2K uses are
boot.ini,bootsect.dos,ntldr,ntdetect.com, and ntbootdd.sys
To remove from a Dual Boot,insert floppy and at the command prompt type in SYS C:\,then look in directory of C:\ and locate the above mentioned files and delete

by brettcard

The above is correct but there is a simpler solution to that...

1: boot from the ME boot disk (because you want to give it ME boot files and not 98 boot files when you sys the drive with the 98 boot disk it will mess things up)

2: at the a: prompt type in SYS C: then hit enter

3: After it says System files transfered then press CNRL + ALT + DEL (that will reboot the computer)

4: once the computer boots into Windows ME then go into my computer and the C: drive and Delete the Windows 2000 directory and ntldr, boot.ini, bootsect.dos, ntdetect.com, and ntbootdd.sys

Then every thing is done and Windows 2000 is gone

by sergey kovzik

all above is ok if not take in account that nor "SYS C:", nor "format C:" isn't working in Windows ME... you'll get a message like "use setup program to make drive bootable etc". and those guys didn't say about files in "Program Files"... And what is even worse - some of WinME files here was overwritten by Win2K, so it is difficult to make easy clean-up. Sorry, pal - I played with WinMe for some time and downgraded to Win98SE... Too much problems overweighted new pleasures. you may need to repeat WinME installation.

This discussion is closed to new replies.