2 replies
by r5150 Accepted solution
by hal 9000 Accepted solution
You have a Hardware Problem and not a Software Problem.
So start with the basics. Remove everything unnecessary and just retain the M'Board, CPU, RAM at least 1 stick and a Video Card and see if things change. Try a different monitor as they can fail and if you still get nothing try a different Power Supply as these cause quite a few problems that are hard to track down. If you are still getting nothing try clearing the BIOS and try again as it's possible that the BIOS has been corrupted. If you still get no display your most likely problem is the M'Board needs replacing.
If it works start to fit parts one at a time till it is either working correctly or stops working. You will then know which part has stopped the unit working and can remove it to get the system up & running again. But remember to do this with a Known Good Power Supply and a Known Good Monitor as you can waste hours chasing your tail around because of a failed hardware component that you think works.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending