Discussion Locked

Restrict access to the Internet

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have created a group called "Internet"
This group is created in Windows NT.
I access the Internet using leased line through Cisco Router.
I want to limit the Internet access so that only people belonging to the "Internet" group can access the Net.
Alternative suggestion to allow only a group to the Internet Access is welcome

9 replies

by zchris

do you have a proxy-server installed? or your isp? if yes create a policy on your dc. and configure it that way, that your "internet" group is the only one with the proxy in it.

good luck

by tmiller3

If you have proxy...
In Management Console, choose properties on 'Web Proxy', click on Permissions tab, and check box 'Enable Access Control', then add Internet group to the protocols there. If you just have the router going to the server, then I think you'd have to have some sort of other software to do what you want to do..like a firewall of some sort that works with NT and therefore can have permissions set. Otherwise I think you'd just have to remove the default gateway from stations that you don't want to allow access. I have a proxy and accomplish this as I said above. Hope this helps...welcome any comments please

by michael roark - ccna/da mcp 3csa

You can always use your 'access-list' command at your router, and stop or allow any IP that you want, if you're using DHCP, you can use reservations,
unless you want to go by user instead of machine, then 'NO' you are doing it the only way.
Unless you have a logon script when they logon to the domain, that changes their IP. (only works in 2k, NT4 has to reboot)

by bejon.parsinia

An additional suggestion to those listed above is less elegant but does work. Deny the users you do not want to surf the web their gateway address. Savy users will be able to get the gateway off of other machines if they are clever, but this is one way you can do it.

Enjoy

This discussion is closed to new replies.