Discussion Locked

routing through a PC

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi & thanks for reading this.

I'm studying the Windows 2000 track & I have a small network at home.
I have been trying for some time now to work out how make a router with a PC with 3 nick cards in it.
I want to creat a network with 3 segments but I'm struggling to understand the addresing & gateway confiuration for the PC that's to be the router & the configuration that's to be entered in each DC of each segment.

I would really apprecate some sound advice on the confiuration needed to setup my little metwork. If you can help or need further clarification of anything please Email me as macks2@ntlworld.com

With regards mack

7 replies

by paul majestic

Your question needs to be greatly clarified. Why are you trying to setup you machine as a router? Systems usually don't run up to par with two network cards let alone three. Are you trying to use the machine as some sort of gateway or something?

by rgrowcock

More information would be helpful, but in the interm look into this. Sounds like you are trying to set up this system as a proxy server (?). For that you would need a proxy type software. One that comes to mind is WinRoute (www.tinysoftware.com), there is a free version, or limited time use version. Not sure which. Read the documentation about setup for your application.
If you are just trying to share an Internet connection, that is supported under Win98SE and ME. Hope this may help a little.

by freetech

hey mack,
i'm assuming that you are trying to run internet connection sharing with your win2K machine. this is not only possible but works very well with a little patience and trial and error.
first look into your win2K study books manuals for a better explanation. having said that, here goes. install all cards in your system and when the second card goes in, it should give you the option of installing internet connection sharing (ics). install it on the card that has a connection to the wan (or internet). then any other computers hooked up to the other cards will have a access to the wan via NAT protocol. it essentially becomes your gateway. or you could hook up one of the cards to a hub or switch, them all computers on the lan will have access to the wan or internet through the ics on your win2k machine.
hope this is what you were looking for.

This discussion is closed to new replies.