Discussion Locked

Rundll32 error

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a brand Compaq Deskpro system, spent 8 hours installing user software and configuring for our network. I finished the system and installed for the user, everything is working beautifully, except when anyone tries to access any printer settings (ie. properties, sharing etc)regardless of the printer, I get the following error. "Rundll32 has caused an error in , Rundll32 will now close."

The computer is running Windows ME, Logging into Novell 4.11. All the latest updates/hotfixed have been applied.
The printers used the ME drivers, I even went to HPs web site and installed the recommended drivers for each printer. I have also tried driver emulation to a standard HP laserjet with the same results.

I do not have time to rebuild the computer and hope my 8 hours spent building it was not wasted.

4 replies

by james_randy

Some possible resolutions:

From MS KB Q191152

SYMPTOMS

When you double-click a Dial-Up Networking connection, and then click Dial
Properties, you may receive either of the following error messages:

Internal error. Quit and restart the program.

Rundll32 - This program has performed an illegal operation and will be shut down.

To resolve this issue, replace the Tapiaddr.dll file, and then remove and
reinstall Dial-Up Networking. To do so, use the following steps:

1. Rename the Tapiaddr.dll file to Tapiaddr.old, and then extract the
Tapiaddr.dll file from your original Windows 95 media to the Windows\System
folder. For information about how to rename a file, click Start, click Help,
click the Index tab, type "renaming" (without quotation marks), and then
double-click the Renaming Files topic. For information about how to extract
files, see the following article in the Microsoft Knowledge Base:

Q129605 How to Extract Original Compressed Windows Files

NOTE: The Tapiaddr.dll file is in the Win95_11.cab cabinet file on the Windows
95 CD-ROM, or on disk 11.

2. Remove Dial-Up Networking, and then reinstall it. For information about how
to do so, see the following article in the Microsoft Knowledge Base:

Q181599 How to Remove and Reinstall Dial-Up Networking and TCP/IP

by james_randy

Another possibility:
You may receive random general protection (GP) fault error messages in
Mmsystem.dll. You may also receive one of the following error messages:

Rundll32 - This program has performed an illegal operation and will be shut down.

Clicking the Details button reveals a message similar to one of the following:

RUNDLL32 caused a General Protection Fault in module MMSYSTEM.DLL

RUNDLL caused a General Protection Fault in module MMSYSTEM.DLL at 000a:00000032

Thiserror message is more likely to occur after you use the Add New Hardware
tool in Control Panel.

CAUSE

This problem can occur if the "drivers=mmsystem.dll" line is missing from the
[boot] section of the System.ini file.

RESOLUTION

To correct this problem, follow these steps:

1. Use any text editor (such as Notepad) to edit the System.ini file.

2. Add the following line to the [boot] section of the file:

drivers=mmsystem.dll

3. Save and then close the System.ini file.

4. Restart your computer.

by jeffs

I thank this person for the effort. I had tried both these solutions before initial email per MS Technet. Thank you for the responses. In the mean-time, I solved the problem, the NWclient32 V3.2 was causing the issue. I upgraded to V3.3 and the problem was resolved.

This discussion is closed to new replies.