5 replies
by pilot2969 Accepted solution
by older mycroft Accepted solution
I'm assuming that the Bad HDD is still connected to the Primary SATA port - if this is the case you should swap them over so that the Bad HDD is now on the 2nd SATA port.
If that doesn't solve your dilemma I would suggest you purchase an external enclosure and connect the Bad HDD via USB. That way you can connect it AFTER you have successfully booted from the Good HDD.
It'll then act as a slave HDD and not interfere with the running of the system. Retrieve your wanted files, then format the HDD and see if you can use it - it will probably even work when reconnected inside the computer case.
by pilot2969 Accepted solution
by older mycroft Accepted solution
BTW - where can you get a recovery service for $200 ??
I'd have expected to pay that just for the ESTIMATE !! ;)
by pilot2969 Accepted solution
The 200 is the minimum price, and that's only if it's a software related crash, if it's mechanical it can cost as much as 1800. The estimate is free thankfully.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending