Discussion Locked

SCSI and IDE drives in one system

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
In my PC, I have a SCSI drives loaded with Windows NT4 server, and would like to add another IDE drive into the system. After installing the IDE drive I powered up the system, the system automatically looks for boot files from the IDE drive instead of the SCSI drive. Of course, the IDE drive does not have any bootable files on it. How to resolve this problem?

9 replies

by or lantech

Don't have a total answer for you but heres some basics. IDE drives will ALWAYS boot first unless your bios allows you to change this (rare). You will need to have some basic NT boot files on the IDE drive including an edited boot.ini file that points to the scsi drive to run. Off the top of my head I don't know an easy way to do this. Hope it points you in the right direction.

by weirong_w_lue

Most new BIOS configs allow booting from SCSI first. Look in the Advanced BIOS Features and there is usually boot from first, second and third plus allow boot from other devices, Set the first boot to be SCSI (the options can be IDE0,IDE1,IDE2,IDE3,Floppy,LS120/ZIP,SCSI,CDROM,Disabled) and there may be others If SCSI is not an option on the first three then disabling them and enabling allow boot from other should force the system to boot from your SCSI drive.

Hope this works
Chris Hirst

by don christner

From within IE, do a search for Q133491 titled "How to add an ide drive and controller to scsi Winows NT system" Gives you step by step directions.

Don

by weirong_w_lue

Most new BIOS configs allow booting from SCSI first. Look in the Advanced BIOS Features and there is usually boot from first, second and third plus allow boot from other devices, Set the first boot to be SCSI (the options can be IDE0,IDE1,IDE2,IDE3,Floppy,LS120/ZIP,SCSI,CDROM,Disabled) and there may be others If SCSI is not an option on the first three then disabling them and enabling allow boot from other should force the system to boot from your SCSI drive.

Hope this works
Chris Hirst

by chris hirst

Most new BIOS configs allow booting from SCSI first. Look in the Advanced BIOS Features and there is usually boot from first, second and third plus allow boot from other devices, Set the first boot to be SCSI (the options can be IDE0,IDE1,IDE2,IDE3,Floppy,LS120/ZIP,SCSI,CDROM,Disabled) and there may be others If SCSI is not an option on the first three then disabling them and enabling allow boot from other should force the system to boot from your SCSI drive.

Hope this works
Chris Hirst

by chris hirst

Most new BIOS configs allow booting from SCSI first. Look in the Advanced BIOS Features and there is usually boot from first, second and third plus allow boot from other devices, Set the first boot to be SCSI (the options can be IDE0,IDE1,IDE2,IDE3,Floppy,LS120/ZIP,SCSI,CDROM,Disabled) and there may be others If SCSI is not an option on the first three then disabling them and enabling allow boot from other should force the system to boot from your SCSI drive.

Hope this works
Chris Hirst

This discussion is closed to new replies.