Discussion Locked

searching for boot.ini file

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Everytime my system boots up i get the following error message:

cannot locate boot.ini file, searching for hard drive. can anyone recommend the most intelligent way to replace my boot.ini file? should i simply reinstall win2k?

i have it set up to boot to the hard drive then floppy and finally cd rom.

thanx for any suggestions.

regards

joe

3 replies

by bentgellerich

Create a file using notepad and enter the following info (between the -----):
-------
[boot loader]
timeout=0
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect
-------
If you installed windows on the primary IDE drive on the first partition...in other words the default location you won't have to modify anything other than that increment multi(1) for controller and rdisk (1) for Secondary IDE and partition (2) for second partition.

notice Controller and IDE channel increments start at 0 and partition starts at 1.

don't worry about disk(0) unless you have scsi

also make sure you save the file as boot.ini and mark it hidden system using the attrib command.

If you need help, email me and I will make it for you and email it.

This discussion is closed to new replies.