Discussion Locked

second DHCP client can't connect

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

windows nt 4.0 sp6a server (BDC w/DHCP)
cisco switches (i have no control over; been told they are configured correctly)
windows nt clients (hp vectra vl400 integrated 3com NIC)

after installing NT onto machine & connecting to network it is unplugged from ethernet port (100/fullduplex). a second machine is then plugged into ethernet port (already configured) so that i can work on it. the second machine is able to get an IP but unable to logon to the domain. when i plug in any other machinei get the same result=domain server unavailable.

it seems this problem is occurring more frequently. here is what i have done so far:

used machines on different outlet/ethernet port.

PC's network interface is OK & working - have used several NICs & (new) machines w/integrated NIC as well.

release/renew IP.

changed settings 10/100, half/full, autoselect, hardware detect

expanded to second subnet recently because i was running out of IP's-connections are successfully been made to new subnet.

thanks

3 replies

by green lantern

Are the "second machines" all NT/2000 workstations? and do they have valid accounts in your domain? Do they all get the same IP address or are the IP addresses all different? What does your DHCP show for active addresses?

ralph

This discussion is closed to new replies.