Discussion Locked

Securing the VPN server

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have just setup a VPN server and it works well. My concern now is with security. It is going to be placed behind a firewall. How should I setup the firewall so that my VPN works but at the same time not allow everything to get through.

5 replies

by rcc

Allow incoming connections to the VPN server only to port 1723 for the PPTP protocol. COnfigure this at the firewall to ignore any other incoming conections to that host besides the PPTP.
Regards,
Radu

by ann777

The following is a cut-and-paste from Microsoft Knowledge base article # Q162847.

"GRE packets are commonly used internally as messages between routers. For example, an ISP may use GRE to distribute routing messages between its sites.

Ensurethat Protocol 47 is open at the router or firewall. This protocol is required for PPTP to work correctly.

In addition to GRE Protocol 47, TCP port 1723 must be enabled at all routers or firewalls between the PPTP client and server."

If you are using non-Microsoft VPN Client or Server software, additional ports through your firewall may need to be opened as well.

end-of-message

This discussion is closed to new replies.