Discussion Locked

seeing computers on different segments

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a 2000 Professional machine running Novell Client 4.8 and is part of a helpdesk. Will eventually migrate to 2000. All customers are Windows 98 on two Segments or two different Gateways with static IP. When I go into My Network Places I canonly see the computers on my segment or gateway. I do a search on computer name for the other gateway and no results. The same search using the IP I get good data. How can I see computers on both segments or gateways?

3 replies

by umbral-echo

You need to set up some form of NetBIOS name resolution. If you have a Windows NT4 or Windows 2K server you should install the WINS server service, and configure each of your clients to use it by adding its IP address to the Primary WINS Server field in the TCP/IP properties.

Lacking a server, you will need to set up an LMHOSTS file on each machine. The most efficient way to do this is to share a central LMHOSTS file and use a #include statement in the LMHOSTS on each client to redirect it to the shared LMHOSTS file. This way you only need to update one file when changes occur. Without a domain (Server)these solutions will not generally allow you to see all the computers in My Network Places on the other subnet, but you will be able toconnect to them using their name. Consult http://search.support.microsoft.com and look for the keywords "Domain Browsing with TCP/IP and LMHOSTS Files" for an article about name resolution using this method.

This discussion is closed to new replies.