Discussion Locked

Serial Mouse in NT

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I can not get a serial mouse to run under WIn NT. What drivers or settings should I change to make it work?

5 replies

by djroecher

Hi,

if you use an ups then you probably have the /noserialmice set in your boot.ini (hidden on c:\) - try to remove it and reboot...

else: try different mouse

hope that helps

djr

by tracys

Have you added any hardware to the inside of the box. you may have unpluged the ribon cable or moved some jumpers. try reseating the card in the slot of the pci or isa bord. or unpluging the ribon cable from the mother borad and re pluging it back in.

This discussion is closed to new replies.