Question Locked

Serious problem

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Yesterday I bought a new TFT display, connected it to my laptop, set the settings in laptop so, that only the new display works and the laptop display stays always off.

Today I installed some drivers for my graphic card and then without rebooting accidentally installed another drivers (for graphic card too). After rebooting both screens are black... Laptop screen doesnt show anything, but the windows is running (I can hear sounds from it).

Anyone knows the solution? Any help would be appreciated as I cant do anything with my comp...

Computer is - Toshiba Satego P100-10U
Graphic Card - Geforce go 7900 gs

8 replies

by older mycroft

Then, while in Safe Mode, access your graphics display settings and switch them back.

by tig2

There is a toggle- F8- so that I can throw the display to a secondary screen.

Using the lappie as a standalone, try booting and then hit F8. One of two things will happen.

You could find yourself in BIOS. Not knowing your personal level of computer proficiency, I will advise that you need to use your keyboard only to maneuver here. See if there are any changes that you can safely make to improve your display life.

You could also find yourself looking at the lappie display showing Windows booting normally. Check Hardware Manager to find the conflict. If possible, kill the conflict.

Now include the secondary display. Do not exclude the lappie display.

Try to uninstall the secondary driver that was accidentally installed. Run CCleaner recursively until you get no more errors. Let me know if you need additional information in this step.

Good Luck!

by obwarzanek

First of all - thanks for responding guys.

The matter is - I can't see anything on both displays, there is no screen (both are just black like there were no signal from the computer). I think its the problem with those drivers...

Even if I press F8 I dont know if I am in the right option (safe mode I mean). Thats the problem. But windows starts like usual (I hear the sounds). Any other ideas?

by tig2

Have you disconnected the external display?

If yes- let Windows complete the boot cycle. The hard drive will go quiet. Now hit F8.

If you still have nothing, we'll go on. I'm thinking a Live CD- PCLOS would be the best, I think. It will look enough like Windows that you should be able to get to next steps.

Let's know what is happening!

PS- Public service announcement here. Remember to mark as helpful all of those as are helpful!

by sue t

Or you try booting to CD and do a system restore to a time prior to your changes. You may have to go into the BIOS and make the CD drive the first bootable device. But since you can't even boot to safe mode and see anything you may have serious problems. Do you see anything on the screen when you boot to a CD/DVD?

by obwarzanek

No, I dont see anything at all while its being rebooted.. :( If I could see BIOS I would just reinstall windows. Now I cant do anything because the screen is all the time black...

by jbafile

Toshiba laptops are known to get stuck when trying to push a display signal to an external display...

...have you tried your Function + F5 combo for toggling the display once your machine completely boots into Windows?

This discussion is closed to new replies.