Discussion Locked

Server Service

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

The Server service unable to start because of not enough space available,
The PC Configuration - IBM 300GL PIII/550, HDD 10GB, memory 64mb, HDD Free space 8GB.

I 've tried to re-install/configured the NIC and it related Service. But still the problem not solved

To solve this problem, is to re-load NT and configure the NIC, It works.

Are there any alternative and simple solns apart from re-loading NT. Pls Advice

7 replies

by jaystar

This error can happen when you install/reinstall a nic in an existing machine with out re-applying your service pack. I would suggest trying to re-install whatever service pack level you were at.

Hope this helps you...

Jay

by avachon

HI, Jay is correct. You must reinstall your service pack after each configuration change such as a nic driver load. The most recent service pack is 6a.

by garetjax

As mentioned above, reinstall the NT Service Pack. FWIW, the problem you describe is often causes by an out-of-date "Protected Storage" server. Reapplying the service pack corrects this.

Good luck.

This discussion is closed to new replies.