9 replies
To share an Internet connection it's probably a bit more complicated than you were expecting.
To start off, you need to connect the two computers with a TCP/IP compatible network interface. This is done easily and cheaply with a couple of 10mbpsethernet cards. If you are just connecting two computers you can purchase a cross-over network cable. If would want to connect more than two computers you will need a hub or a router.
Once you have the two computers hooked up over tcp/ip the computer that is connected to the cable modem must "share" the internet connection. If you are using windows 98 or windows 2000 you can simply use ICS (internet connection sharing) to share the connection. If you are using Windows 95 or NT you will need to install proxy or NAT software (such as WinProxy) to "share" the connection.
Of course, the details on getting from A to B aren't listed here (not enough space); but, that's the general outline of what needs to be done.
by ronnonf
I don't even think you need that much. I agree that it is not as easy as you probably thought but it is not sooo difficult. I believe you can purchase a DSL/cable switch which contains the input from the modem plus at least 4 ports for additional machines.
You will need to modify the gateway address on your machines config.
by ebob
There are basically 2 choices: software or hardware sharing.
Software is (assuming Windoze) Internet Connection Sharing (ICS). You nominate one PC (the more powerful, usually) as your "gateway". Typically it will have 2 NICs. One that connects toyour ISP, the other to your other PC. For details, consult the Windoze Help system. You should also run a software firewall on this gateway. ZoneAlarm is recommended. What I do not like about this approach is that it requires to have both PCs running to access the Internet from the "non-gateway" PC.
I prefer the hardware approach. There are a lot of cool boxes (Asante, SMC, 3 Com, etc.). These are typically 4 port switches, with built-in DHCP server, firewall (with NAT address translation), and router. You plug the WAN port into the cable or DSL "modem" and the PCs into the LAN ports. They are expandable by stacking the same manufacturer's switches/hubs. Only one NIC per PC. Some even come with a built-in print server, so you only need to have the PC you're using up and running to really use it.
(BTW: microwarehouse.ca is currently having a sale on the SMC Barricade - and NO, I do not work for them!)
by mjervis
Very Simple if your new to networking or have no desire to learn networking and want a simple reliable asnswer. SMC Barricade 7004 BR. They run about $130.00 they have 4 ports on it. Install a 10 base network card into your computer the windows software should find it and install it. Then right click on network neighborhood and choose add, then in the next box choose protocol, then in the next box click on microsoft then on tcp/ip. then hit ok all the way untill it installs the tcp/ip protocol.
Use the default settings ... Nothing to change. Then run cat 5 cables from the network cards in each computer to the SMC Barricade and then one from the SMC Barricade to your cable modem.
You should then be online very simple and with built in security for your network. However if you want to open up your network for special applications you will need to read the manual that came with the barricade. Other than that this is a simple solution and will have you on the net securely :-)
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending