Discussion Locked

Setting up print on a NT server

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are currently useing Novell server for print and want to change printing to the NT server what do I need to do to set up print on the NT server.

5 replies

by uffe.sommerlund

Printing on the NT Server

Under Start menu /Settings/Printers, add printer choose Local printer select add new port choose LPR port specify by IP Address select have disk choose Driver .....

BR
Uffe

by mphoffar

You'll want to install something like HP JetDirect on the server and either setup each printer to print to the MAC address or TCP/IP address (if you can do that). The setup for this should ask you where the drivers are, so it can push them out to individual users as needed. If you're going to use TCP/IP to print, you'll need to have the TCP/IP printing installed on the system as well.

Once that's working, you'd just share the printers out, the same way you'd share a folder so other people can see them.

Good luck to you

Mark

This discussion is closed to new replies.