Discussion Locked

setting up proxy on NT 4 server

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I was invited to help installing Internet Proxy on a small network based on Windows NT 4 Server and five win98 wks. It is a Non Governamental Organization to help homeless people.
First they had ISP DSL installed and running on the server.
I downloaded the free Proxy from AnalogX.
When I installed it, the existing DSL connection, stoped working!
I need a help, first to restore the connection to DSL or ISP, then to setup the Proxy.
Can you please show me the steps that involve in setting up this? Many thanks!

1 reply

by talli

Perhaps u can provide some additional info about your NIC setup. Do u have two separate NICs (for LAN and Internet), each with it's own unique address?
Check carefully their configurations and bindings and then, if u still need help, post that info here.From what I know, the DSL NIC has to have DNS and WINS disabled (if dynamic IP is provided by your ISP)-all the necessary info for it goes from your ISP's DHCP server. (Call your ISP for more accurate NIC setup info, it may be different and might give u the answers u need). On the LAN-if u don't have DHCP, u need to manually assign a static IP to that NIC.And with the DSL NIC-have only TCP/IP bound to it.
U didn't mention it, but if u have 2 separate NICs, and each of them works fine on it's own, they just can't perform together-perhaps some IRQ/I/O conflicts?
Also, I've heard that taking the default gateway out from the LAN NIC makes the DSL NIC work fine. Go figure... :)
HTH so far...
Good luck.
Talli

This discussion is closed to new replies.