Discussion Locked

Setup a network Printer?

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

What is the correct way to setup a network printer? This printer has its own ip address on our network. Do I install IP2P on each desktop or just on the server (win2k) and share the printer?

Is it possible to get all print jobs off the desktop asap and spool them to the server?

Thanks,

Vicko

9 replies

by don christner

Install the printer to the server (point it to the correct IP for the printer) and then share the printer. From each workstation, install the printer as a networked printer (point it to the printer share on the server). Then each workstation will send the data to the server where it will be spooled.

Don

by qb

To make the client installation easier you can install additional print drivers for other operating systems. Once you have the printer installed on the server go to start> settings> printers> right click on the printer and select properties, clickon the sharing tab , click on the additional drivers button, check the boxes of the extra drivers that you want to install and say ok, it will prompt you for the location of the drivers, browse to the directory were thay are located and presto whenyou install the network printer on the clients it will automatically find the drivers and install them!

Hope this helps

by tony.colgrove

Install the Printer as a local Printer on the server. When prompted to select a port you will want to create a Standard TCP/IP Port and supply the IP address of your printer. On the following screens you can select sharing the printer. Also if you have Win9x, or NT clients you can also supply the drivers, so these clients will automaticaly download them from the server.
One gotcha, IF you have Win9x clients do not make the share name more then 12 characters or your 9x machines will not be able to see the printer share. Once that is done:
On you workstations just browse to the server in network neighborhood (My Network Places) double click the server, then right-click on the printer and choose Install or Connect (depending on your client OS version). Thats it. (you get a little wizard for Win9x clients)
Now your client print to the server queue and your server will also have the drivers for the clients. No running around with install disks.

by carlo.a

when installing your net-printer, install as local printer and then add a new port; system will reply with a choice of network port available and then wil prompt you for printer setup (IP address, netmask, default gateway and so on).

This discussion is closed to new replies.