4 replies
the R3000 series uses:
- 200-pin SODIMM,
- DDR PC2700,
- CL 2.5,
- Unbuffered,
- Non-ECC,
- Non-Parity,
- DDR-333MHz,
- 2.5V,
anything else won't work
Max RAM = 2GB (2x 1GB modules)
the usual problems encountered with HP/Compaq RAM is timings, if the timings are different than what the system shipped with then the system won't even boot
all my HP systems using DDR2 1.8v RAM and require specifically 4.4.4.12 timings and nothing else will work,
which makes it hard to find RAM
ie. no one makes DDR2 667MHz, PC5400 CL-4 anymore it's DDR2 667MHz, PC5300 with CL-5 timing which won't even detect in the system,
installing it just gives the "No RAM" beep code.
Crucial has 1GB Modules for around USD$50.00 ea
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=503A590EA5CA7304
by neeboy74
HP / Compaq notebooks don't have a stacked or opposing pair in one location
(at least none that I've ever seen)
if you only see one slot in the back then
one stick goes in the back and the other is under the keyboard
- here's the list of R3000 systems:
here's the "How to Install RAM" page:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00820047&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
Took a while to find it
here's the page how to... (with video):
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00293581&tmp_task=useCategory&lc=en&dlc=en&cc=us&site=null&key=null&product=442914
edit: (more info (again))
Yeah, HP / Compaq puts the slots in two different places. Since the one you see on the bottom is empty, you've definitely got one of the models with a slot under the keyboard.
Incidentally, you may want to compare Crucial's prices with Kingston Technology memory. I've used both in the past without a problem, but Kingston has a very nice utility to detect your configuration, tell you what you have, and exactly what to order to upgrade.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending