Discussion Locked

Sharing internet

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have nt 4 server and 5 workstations and 2 win98 pc. I have a dial up connection on one workstation to ISP. I need to share the connection with other pc.. How would I do this . Thanks

11 replies

by russ werner

Windows 98se and windows2000 each provide an option for internet sharing when using them to connect to the internet. You simple check a box and all computers on your lan can share the connection. But be aware the computer with the sharing enabled will have it's ip changed to 192.168.0.1 and this may cause you some additional problems with the ip addressing scheme of your existing lan. Another way is to install an internet connection sharing software, one that I have used that works well is Win Route Pro. This program can be found on www.download.com and has a 30 day testing period. You install it on the computer with the internet connection and set up the rest. This program has many features, and is easy to learn.
Good Luck!!!

by magetower

Be aware that if you use the Internet Connection Sharing that comes with W98 you will be limited to 2 simultaneous connections. (ie only two systems can share the connection at one time and the host system counts as one) Also like the previous answer your IP addressing on the host will be changed and the other systems needing to use the connection will need to use DHCP (not the one on NT server).

If you have access to W2K Prof you can setup ICS on it without the 2 system limit and you can tell it to use your current IP address.

There is a way to do it with your NT4 server but I'm not familiar with that setup (it may requre 3party software).

by johnm

I've setup several small networks with great success by installing a small 'Proxy Server' running WinProxy 3.0.. WinProxy is easy to install and maintain. A 5 User License will support around 12-15 users because they don't all 'click' at the same time. I use old Pentium 166mhz or better CPU, 64mg Ram suggested(but I have 2 systems w/only 32mg, 2-NICs(1 for DSL/Cable), running NT4Workstation. Obvioulsy a DSL/Cable connection is suggested if possible, but I've used a single 56k modem to support over 12 users for Email & Browsing with outstanding success. If you are just going to use a modem you could get away with using a Win9x box but NT is more stable. If you use DSL/Cable and your ISP uses DHCP, choose NT-Workstation over NT-Server because Workstation allows TCP/IP to 'obtain an IP Automatically' where Server requires a static IP! Anyway, I am always truley amazed at how well one 56k modem can support so many users!!! Good Luck, hope it works out.

by johnm

I've setup several small networks with great success by installing a small 'Proxy Server' running WinProxy 3.0.. WinProxy is easy to install and maintain. A 5 User License will support around 12-15 users because they don't all 'click' at the same time. I use old Pentium 166mhz or better CPU, 64mg Ram suggested(but I have 2 systems w/only 32mg, 2-NICs(1 for DSL/Cable), running NT4Workstation. Obvioulsy a DSL/Cable connection is suggested if possible, but I've used a single 56k modem to support over 12 users for Email & Browsing with outstanding success. If you are just going to use a modem you could get away with using a Win9x box but NT is more stable. If you use DSL/Cable and your ISP uses DHCP, choose NT-Workstation over NT-Server because Workstation allows TCP/IP to 'obtain an IP Automatically' where Server requires a static IP! Anyway, I am always truley amazed at how well one 56k modem can support so many users!!! Good Luck, hope it works out.

by ebob

Or Hardware.

For example, the Asante FriendlyNET FR3004LC is a switching hub, with some firewall capabilities, and a print server. It is meant to be used to share broadband (e.g., cable or DSL) links. But this box, and I'm sure other brands like SMC, comes with an analogue modem port. Normally this port is conected to a standby modem so that when your broadband crashes, the modem will take over.

If all you have is a dial-up, then you should be able to setup your box to use it all of the time.

Most of these boxes only have 4 LAN ports, but you can extend them with add-on hubs/swithces.

Note: you should ask yourself if you really want to share a dial-up. I can barely stand it with a single PC. But a half dozen or more - yipes!

This discussion is closed to new replies.