13 replies
by timber
by jim.turner
by dcho
try running system file checker (start\run\sfc) to see if any files got corrupted. Running the shutdown supplement only worked some of the time but after running sfc, haven't had a problem so far.
good luck!!!
by jim.turner
Remove the PCI Bus
On your screen, locate and click the Start button. From the Start menu, point to Settings, and then click Control Panel.
Note: In Windows Me on the left side of Control Panel, you may have to click View all Control Panel Options to see all of the icons.
In Control Panel, double-click the System icon.
In the System Properties dialog box, click the Device Manager tab.
On the Device Manager tab, select the View Devices By Connection option.
click the plus sign (+) in front of Advanced Configuration and Power Interface (ACPI) BIOS or Plug and Play BIOS.
Click PCI Bus.
Click Remove.
Click Remove from all configurations. Click OK to confirm the removal.
When prompted to restart the computer, click Yes.
During the restart process, all hardware in the computer is redetected and reinstalled. Sometimes during this process a device may require the CD to install the drivers properly. The CD-ROM drive is not available during the first restart, and any device that requires the CD should be canceled so that you can continue starting Windows.
After Windows loads, check the Device Manager again and remove any devices that are listed under the Other Devices category.
When prompted to restart the computer, click Yes. As the computer restarts, you are able to install drivers that are on the CD.
Check the Device Manager to verify that all devices are installed properly and there are no conflicts or devices under the category Other Devices.
In Device Manager, verify that the USB controller is properly installed. Also verify that there is no hardware listed under Other Devices.
by jim.turner
by aled
Being a 'non-fan' of any form of Power Management, because I have users who were restarting their machines while it had gone in to standby, I rather stupidly disabled it in BIOS, and then spent 2 days working out what was wrong. So it's an easy mistake to make, maybe worth a check.
NOTE:
This is the first time I've been able to admit this. I now feel I am a 'whole person'! Thankyou! ;-)
by jim.turner
by flan
by jim.turner
by jfjester
if you pc is having dificulty is shutting down it is usually due to a start up application, go - start- run-msconfig- startup- and take out applications one at at time- usually leave in systray- you will notice a big preformance increase if you takeout everything but what is necessary- reboot - and see if that corrects your problem -
email me if you have any questions
by jim.turner
by jim.turner
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending