11 replies
by joeydawop12
by skymagic
by barmaley
Option 1:
Disable APM
Disable the CMOS APM (Advanced Power Management) and configure Windows to manage APM. See the procedures below to perform this task.
Disable the CMOS APM.
Restart the computer and press F1 at the blue Hewlett-Packard Screen.
Select Power or Power management, and change the value to Disabled.
Save and exit.
Configure Windows to manage APM.
Click Start, point to Settings, and then click Control Panel.
Double-click the Power Management icon, select the settings you want for APM, and then click OK.
Option 2:
Remove and reinstall Realtime clock
Restart the system in safe mode by pressing and holding down the Shift key while the system is starting or booting up.
Click Start, point to Settings, and then click Control Panel.
Double click the System icon.
Choose the Device manager tab.
Click the plus sign to the left of System devices.
Scroll down to the System CMOS/Realtime clock, click once to highlight, and then click Remove.
Reboot the system and the Realtime clock will reinstall automatically.
by skymagic
by barmaley
Correction.
I took those steps from web site for Hewlett Packard. So just drop HP part everything else should work
by skymagic
by kgosnell
Unless you replaced the batery, it may be bad anyway, I had one that tested ok and my system continued to slow untill I insisted it be replaced under warrantee, problem solved, also you can go to http://www.gregorybraun.com/ at the bottom of the page , there is a clock syncronizer for the atomic clock at Bolder Colo called WEb Time.
Hope this helps
by skymagic
Hi skymagic,
Another possibility is electrcity. Check your power source for the frequency & output.
If you are in the U.S., the frequency is
60hz with AC output of 105-115volts. If the electricity varies more than that, your clock
will be off. When I was in Bosnia, we had
computers that did not have switchable power
supplies (110-220volts). The systems were 110 and the camp generators were 220/50hz. We used step-down transformers to bring the power to 110, but, it was still 50hz. The
clocks on the computers lost 15-30 minutes per day. If you are hooked into an
uninteruptable power supply, have it checked.
I wish you well.
by skymagic
by skymagic
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending