Discussion Locked

Slow NT

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My desktop is a Windows NT4 workstation. Every morning, it takes about 12-15 minutes to boot the machine before I can launch any application to start my work. The PC is a 233 MHz with 64 MB RAM, and two HDDs, 2 GB each. The first one has 600 MB freeand the second one has 750 MB free space. I have the following software installed on my PC - Outlook 98, MS Office, ftp software, antivirus s/w, JDK, ERD tools, Java dev. tools. Any body knows why the machine is so slow? Thanks in advance.

Ajay

13 replies

by ezmoney

Need a little more info to make a "SWAG" at what's happening. Have you looked in event viewer to see if any services have failed or any stop signs or ! marks on any events? That's a good place to start. What programs are you starting at startup? What Antivirus are you running? Is it running a scan at startup? These are a few things to look at. If I can be of any further help send e-mail to rodneyw@jep3.state.fl.us. Good Luck

by edward clint

If it actually takes 12-15 minutes something(s) is/are really wrong. As already noted it is hard to say what exactly without more information.
Have you sat and watched the entire boot process to see what, if any, part of the process takes particularly long.. or if everything is just slow. In normal operation(after booting) does it perform well or slow?

Couple of tips..
-Make sure the boot selector(where you can by default choose between winNT and winNT vga mode) is set to about 5 seconds instead of 30.
-In the BIOS have fastboot/quickboot enabled if exists.
-NT is ram hungry.. 64 is really insufficient when you are running large or multiple apps as you in fact are. This forces the use of slower virtual memory more often and degrades performance.

-E

by kbrx

This is just a hunch:

Check your Antivirus Software config. It is possible that if is configured to "Scan All" at boot. If it is, disable that option temporarily and reboot. See if that provides any improvement.

by ugotdave

Had the same problem on my machine at Work. But it only took about 5 minutes to boot. Asked my lead tech why and he said that the HD was fragmented. I ran an NT defrag utility and it ran much faster. If the page file gets to fragmented it bringsthings to a crawl...

Hope this helps? And have a Happy Holiday

Ugotdave

by cd

Have you installed and uninstalled many new software applications on your machine?
In this case, it is a possibility to have a huge registry file, with entries you usually don't need.

In this case, there are 2 options:
- you either clean up your registry manually. But careful, you may render your machine useless

OR

- you copy all the important personal files on a different partition, then format WINNT partition (usu. C:) and reinstall WINNT. If you have the rights to do it. Or ask the admin.

I hope this helps.
Cornell

by raymond.caldwell

One of the most important things you can do is definietly put in more memory into your machine and possibly, create a page file on your 2nd hard drive to increase the performance a little bit more (or if you have one there increase it, you may have disk thrashing going on). Also, another thing you can do in go into the Task Manager and kill the EXPLORER.EXE process, this will free up about 4MB RAM to your system which can help as well including any other processes with the HLP word at the end. Most of those programs are help programs that take up physical memory. Try it out....but you really me want to add more memory since you aare running Java tools. Also, there is new utility called FreeMem Pro that will help you get improved performance from your computer's RAM. Here is the URL link: http://www.real.com/accessories/freemem/main.html?src=001113EL2E. Good luck to you....

Ray

This discussion is closed to new replies.