Question Locked

SMC Tigerstore capacity problem

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My company has purchased the SMC Tigerstore and 4 Seagate 750 GB drives. After going through the configuration we are only able to access 46GB when configured in RAID 5 or 4. I rezeroed the drives and tried RAID 0 and got 745 GB, still no where near the correct capacity.
SMC tech support gave me an FTP site to download a new firmware. The guy stressed using the new utility to upload the firmware, but I could not find a new utility to download from SMC.com. We still get the same results even with the new firmware.
Any ideas?

2 replies

by jimg

God I wish I had read this earlier. I had the same results as you, then got told after more than two weeks sweating it through with tech support that the problem was hardware and to RMA the unit with the distributor (CDW) and get another. I did, and out of the box same symptoms. I then tried something tech sup didn't suggest and zeroed it with just 3 drives in it and low and behold instead of 46GB I had 1.4TB. I am now trying to work through getting the 4th drive recognized.

This discussion is closed to new replies.