Question Locked

Software that will schedule a full HD clone do you know of one?

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Here is what I want to do:
Make a bootable clone of the c:\ to a ext. usb/esata hard drive at a specific time. Using XP and 3-4 enclosures I will rotate the drives each day between onsite and off site overwriting the entire drive each night. This gives me a max loss of one working day and I keep the tax office running.
If I have a system failure I can remove the bootable clone drive from the enclosure, put it into the system and boot up inside of 15mins. Right now I can get it done with Ghost 10.0 and do it manually but this is getting old.
I've downloaded a number of trial versions from major providers looking for this ability. All have a cloning ability but not one has had capability to schedule the task.
Thank You for your help

18 replies

by oliver

Hi,

Acronis TrueImage is fully capable of doing scheduled backups. You can decide if you want a daily full, incremental and/or differential backup. I have saved tons of machines with TI and higly recommend it. Never had any issue with it. Where ghost failed, TI always was able to save the day.

by poppatab

Hello,

You sure like going to a lot of work if you want to save one hard drive. With 3-4 hard disks available, you can implement RAID and save yourself all the trouble. Try this link: http://en.wikipedia.org/wiki/RAID and see if you can do the back up without switching out disks all the time. Windows Vista and 7 manage to do backups without compression along with system images. There is another discussion here with a lot of the info you are looking for. I may have missed the point here, but with attached storage you could do well with free programs that do the scheduled back up.

I chased down the post: https://www.techrepublic.com.com/5208-6230-0.html?forumID=101&threadID=321197&start=0

by adlcs

So nobody knows of a software program which will CLONE a hard drive at a set time everyday. No such thing? Guess I keep looking

by rob miners

have to be cloned everyday? I only clone once I have everything setup the way I like it and and only rebuild when necessary.

by poppatab

I could swear you have been given at least two ways to do the clone. Acronis TrueImage, RAID configurations, and if using Win7 pro or above; win 7 back up with disk image. Here is the URL for the Acronis home 2010. http://www.acronis.com/homecomputing/

Just search google for disk cloning software

by awd_guy

Acronis won't do it even after I tried reverse engineering their clone process.

HDCopy doesn't appear to support scheduling or scripting...

I have a very similar situation as yours and think this should be a standard ability for all these cloning products.

by balge

as already stated
Acronis TrueImage WILL do it - I did it this morning..... look in 'scheduled tasks' or under 'operations' and schedule it whenever you want - daily, weekly or monthly - make sure to tick 'perform on next boot if schedule missed' or whatever it says.
I suppose a free trial version may not have this functionality but my basic edition certainly does
try reading the help

by awd_guy

I have TIH 2010 Home, and while you can schedule many different backups and image tasks, I cannot find any way to schedule a clone task. Clone only appears to be available from tools & utilities, and there is no way to save it as a task to schedule.

by balge

terminological inexactitude
its still a bootable image
its merely a marketing phrase

afaik...

by awd_guy

An image is a single file or split set of files that contain an archive/image, usually compressed of a hard drive/volume. A clone is a copy of all of the individual files from the source drive/volume on another drive/volume identical in layout and file structure.

It is a similar difference between scanning a paper document to a PDF vs. making a photocopy of it.

In this case, the goal is to clone an internal SATA drive to an eSATA drive on a nightly basis making a perfect replacement in the case of a failure of the primary.

Unless there is another way to do it, the only way I know to initiate a clone is from the "tools and utilities" section of TIH and thus no way to schedule AFAIK.

I have posted on the Acronis forums
http://forum.acronis.com/forum/6799
and have gone as far as trying to reverse engineer their clone process and failed.

So unless you have personally done it and can detail how to schedule a recurring drive CLONE task, please stop saying Acronis can do it.

by poppatab

Hello,
Have you investigated RAID arrays at all? A RAID configuration will give you multiple disks with redundancy in the event a hard drive fails.

by awd_guy

Yes.

The goal is to have off-site backups through the use of multiple eSATA external drives.

Breaking and rebuilding RAID arrays especially with drives that were both at one point part of the array can be challenging and I am not aware of any way to automate that process.

I can imagine in a bad situation where the "old" drive in the pair is identified as the good drive in the pair and replicated over the newer drive.

by awd_guy

I asked Miray support about scheduling HDClone and got this response...

"currently it is not possible to schedule cloning. We expect this feature to become available with the next major release, version 3.9., of HDClone. However, there is no time frame yet when we will release this version."

by awd_guy

It is kind of primitive compared to the other products, and has to be scheduled using the Windows or other scheduler, but XXClone-Pro will do what we want.

http://www.xxclone.com

I will be testing it later this week.

by poppatab

Great! I just looked it over and it seems to do what you want. Best of luck with it and way to go for hanging-in-there to find what you wanted.

by adlcs

Thanks for all the effort... I'll give it a try. I really can't understand why with programs doing so much these days this was a hard find. Again TY and Go SD Chargers!!

This discussion is closed to new replies.