12 replies
Under NT (by default) will be validated by the highest level of OS found on the network. A different service pack level can make your wks to logon onto a remote (wan) server.
Be carefull with W2k servers, they will try to validate users too.
good luck
It would be a good idea to have the DHCP server running in the same machine as the local BDC. !!!
This will automatically defaults the validation machine to the the dhcp!
by randylyman
by joseph moore
Well, there are only 2 ways I can think of that might work. The first is to put the workstations and the domain controller you want them to authenticate with on their own segment. The segment a workstation is on is checked first, then it will try togo out over the configured default gateway. But, this option might not be available.
The other thing to try to to modify the LMHOSTS file on each workstation. Put in there an entry for the domain controller you want these workstations to use. This will work for the 2000 machines, even though 2000 wants to use DNS for name resolution. The LMHOSTS file is used eventually, on a 2000 box during boot.
Here's the LMHOSTS syntax:
xxx.xxx.xxx.xxx bdc_name #PRE #DOM:domain_name
Good luck.
by shanghai sam
Your first suggestion is in place now; we are a financial institution with a BDC at each branch, and I'm seeing Win9x clients at branches who where logged on by DCs at the operations center. My first thought was that the branch BDC is not respondingfast enough, but another guy wrote yesterday that Win9x clients like to authenticate to a PDC, or they'll look past the nearest server to find one.
I have to pass on the lmhosts file; I need something a little more centrally managed than that.
by shanghai sam
by clrichardson
by randylyman
by joseph moore
Wow. SETPFRDC.EXE. Yep. That will do it.
I also found the following from www.is-it-true.org on the LMHOSTS file configuration that can be done instead of setpfrdc:
"An alternative approach procedure: Add the following line to the file \WinNT\system32\drivers\etc\LMHOSTS on NT workstation. Start the line with the IP of the DC you want to force a logon to followed by the name of the domain & "n" spaces & \0x1C in quotes so that (domain name) + (spaces) = 15. Follow this by #PRE. If the targetDC is at 172.77.71.9 and the domain is "ACME" the line should look like this:
172.77.71.9 "ACME \0x1C" #PRE
"
by randylyman
by randylyman
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending