Discussion Locked

Split a net on 2 subnets

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Is possible this configuration? What IP need to assign to the PCs?
I have 50 PC. One is a domain controler with Win2K Server. Another is a suplementary domain controler with Win2K Server. The other PCs: Win2K Pro.
I have an ADSL 2Mb connection. Actually the IP range is from 192.168.0.1 to 192.168.0.255 with 255.255.255.0 mask. The ADSL router is 192.168.0.1
I need to create 2 subnets that one can't see the other. 30 PC on one and 20 PC on the other subnet. I need for security purposes the users from one subnet can't enter on the other subnet PC's.
It's possible to fragment the existent net? What IPs needs to use? The logon users database can continue centralized on Server/Suplementary Server? It's necessary to install 2 network cards on some PCs (perhaps Server/Suplementary Server)?

Thanks a lot

10 replies

by cportman

You could use this

192.168.0.0
255.255.255.192

Your first range of addresses would be 192.168.0.2-192.168.0.191
The second would be
192.168.0.192-192.168.0.254

You would have to assign secondary addresses to both servers and your router. You don't necessarily need two nics, but it might be a good idea.

You would be better off using default class c addresses. One with 192.168.0.0 and one with 192.168.1.0 - both with the 255.255.255.0 subnet mask. Your router should allow you toset two ip addresses on it- especially since its a 2mb connection.

Good luck
cp

by josep

The 2 nics will be placed on Server and on SuplementaryServer? (i.e. 4 nics?)
Where can I configure Windows 2000 Server for two IP addresses?
Why is better 192.168.0.X and 192.168.1.X than 192.168.0.2-191 and 192.168.0.192-254?
The 2 servers willbe visible from the 2 subnets, and will can look at all PC ont the 2 subnets?
Can I made that ONLY one server is visible from the 2 subnets and can enter on the 2 subnets, and the other only on 1 subnet (one server is secure, but the other-suplementary is accessed by all users)?

by cportman

To configure two ip addresses on one network adapter
start - settings - network and dialup
right click on the adapter - properties
select tcp/ip - properties
click advanced
Under TCP/IP click add
set second ip address/subnet mask

Yes you could have one DC for both networks and other dc for only one of them

Two NIC's is mostly for performance issues

Using the 192.168.0.0 and 192.168.1.0 just makes things easier for you to administer your network.

good luck
cp

by lordinfidel

Just throwing my 2 cents in about Multi-Homed DC's.

It is not a good idea/reccomended to have Multi-Homed 2K AD Domain Controllers.

The solution here is to have 2 domain controllers, 2 subnets, and 1 router (non dc)

Domain A belongs on Subnet A
Domain B belongs on Subnet B

Domain A and B belong to the same forest as individual trees. Domain B should not be a branch of A.

The router, which can be a 2K server with 2 nics in it with Remote Access Service install will act as the gobetween with the 2 networks.

Then In Sites And services, assign the appropiate subnet to each domain.

You can use the Active Directory permissions to control access to all systems (as long as they are all 2K)

Also you can set up IP Sec on the router to not route the traffic to each subnet, excluding the 2 DC's that would need to talk to each other.

Important, each DC must be a Global Catalog Server (GC), or else your clients will be unable to authenticate.

I strongly reccomend picking up the following books,

Inside Windows 2000 server by william roswell, pub by newriders. (a must have)

TCP/IP Network Administration by Craig Hunt, published by O'reilly (a must have)

Either Sams' Teach yourself tcp/ip in 14 days or Internetworking with TCP/IP on NT4 pub by MSPress.

Good luck

by lordinfidel

If you want your clients to have access to the net.

The architecture would look something like this.
key: /24 = subnet mask of 255.255.255.0
/25 = subnet mask of 255.255.255.128
x.x.x.#= 192.168.0.host id

Net (ISP) |
Pub add - ADSL rtr- pvt(192.168.0.1/24)
|
2K Router w/3 nics
Nic1= 192.168.0.2/24 gw=192.168.0.1
also bind x.x.x.3/25 & .129/25 to
the adpater (advanced button in
tcp/ip properties in connection
properties)
Nic2= 192.168.0.4/25 GW x.x.x.3
Nic3= 192.168.0.130/25 GW x.x.x.129

from Nic2 to domain A
DC= 192.168.0.5/25
clients= x.x.x.6-127/25
GW= 192.168.0.3
DNS=192.168.0.2

from Nic3 to domain B
DC= 192.168.0.131/25
clients= x.x.x.6-127/25
GW= 192.168.0.129
DNS=192.168.0.2

Notes on the 2k rtr make it a dns server. Do not make it a root server. Add a root hint to your ISP's dns.
(Hint: You need local DNS installed in order to run Active Directory!)

You need Routing and Remote Access running on the 2K server/router.

The 2k router can also act as a firewall by employing IP filtering on the .2 interface.

Obviously you will need to physically segment your network using hubs and switches.
Do not plug a .10 ip into a hub that is meant for the 128 network. It will never talk to anyone.

I would also employ DHCP on each DC and configure your DHCP ranges for the appropiate subnet. Make every client use dhcp instead of static ips. (saves time in the long run)

Again good luck

This discussion is closed to new replies.