Discussion Locked

Step-by-step guide to set up a VPN

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an office with 10 users, im using an Intellinet Router - Modem to connect to the Internet thru DSL line. Now i want to set up my network so that at least 4 authorized remote users can access my Windows 2003 Server from my office. Hope you can help.

1 reply

by dryflies

here is how to set up the client:
https://www.techrepublic.com.com/5100-1035-5814036.html

To get the server side going install routing and remote access service (RRAS) not that you should have two NICs on your server and one should be connected to the intellinet and the other to your local LAN. from there serve up your ip addresses from the win2k3 server.
The best source for that is "mastering windows server 2003" by Minasi. chapter 20 gives a pretty good step by step for that. too much to put it in here. have fun! and please rate my answer

Good luck

This discussion is closed to new replies.