Discussion Locked

Stop with removal of USB jumpdrive

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have much the same problem as kazzbar. Recently re-formatted hard drive and re-installed XP pro with 2 partitions. With proper shutdown (I can simply remove the same from my laptop) of usb on desktop, I recieve the blue screen with ***stop: 0X00000A (etc.) and have to reboot. It also gives the IRQL_Not_less_or_Equal message. All other USB devises can be removed with no problem. I do notice that the drive is added BEFORE the hard drive in devmanager as with my laptop it is after. All drivers are the same edition as laptop. If I uninstall root hub or controller that jumpdrive is in then it shutsdown but simply stops other devices from working if I shut those down. My usb in the BIOS is disabled. Problem?

4 replies

by sgt_shultz

you are using the usb controller embedded in your mother board. you can try updating the BIOS in your motherboard and downloading the latest usb drivers for it.
there is known problem with usb hd's. search for what looks good to you at support.microsoft.com
one known problem is that if you open a file on a usb hard drive but do not save it before disconnecting your drive you will get a hard error like yours. depends on your motherboard and on your usb device. as you see it works on your laptop.
i would research my exact stop message on both support.microsoft.com and my computer manufacturer's website.

This discussion is closed to new replies.