Discussion Locked

Symantec Firewall/VPN Appliance 200R

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am totally lost on this one. I have a client that wanted a Symantec Firewall/VPN Appliance 200R. So I purchased him one and configured it to allow VPN connects and have connected. But once I have connected I can not see the local network. This is the first time I have used an external VPN device and do not know how to configure it to allow the user to browse the local network. Can anybody out there help me with this....Thanks?

2 replies

by able-admin

My VPN has the same problem. The only way I can view different nodes is through thier netbios name. (ie. type //nodename into explorer) Works for now, but it would be nice to explore them graphically

by robotech

I don't know much about this Symantec device, but I've done it using the Linksys VPN device. Make sure you correctly setup the subnets using a network number eg 10.1.1.0 and 255.255.255.0 instead of just using a single IP address.
Also, are both sites using static IP or just one?

This discussion is closed to new replies.