Discussion Locked

Sysdiff Reliability?

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I will be using a diff file on a hundred or so compaq proliant servers. they are all identical hardware.

How reliable is the sysdiff tool to use on these unattended installs?

Thanks!

1 reply

by shanghai sam

I wouldn't recommend using sysdiff on servers. This tool was primarily intended for workstation deployment (in my humble opinion). It would probably work, but how well would remain to be seen. If I were you, I would rather use the Insight Manager Distribution server option to install the OS, and all relevant drivers. On Compaq servers (as you probably already know, you use Insight manager to Install the OS. You would need to do a bit of research on how to set this up, but will save you loads oftime in the long run. If you have created a distribution server previously, you can replicate the installation on any number of servers after that (provided the servers are of a similar spec). I don't think that this works with apps though (confirm this with Compaq first). It might be a lot slower doing it this way than using sysdiff, but will be much more stable, and your life will be a lot simpler in the future!

This discussion is closed to new replies.