Discussion Locked

System Attendant won't start Ex2k3

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an Exchange 2003 server with SP1 co-existing with Exchange 5.5 server.
Running on Windows 2000 server in Mixed mode. I had trouble with our router
and at the same time I started getting error 1005: MSExchangeSA Unexpected
error The logon attempt failed ID no: 8009030c. I have all Exchange services
using the Local System Account. I tried the local admin account and that did
not work either. The services will time-out if I use the local admin
account. I ran /forestprep and /domainprep prior to installing Exchange
2003. I ran dctest and all of the tests passed. So I am pretty sure I have
connectivity to the global catalog server. I was also thinking I had trouble
with the secure connection so I ran nltest and it confirmed I do have a
secure connection to the domain controllers. I have two domain controllers
which are both global catalog servers.

Any help would be appreciated.

5 replies

by jguasch

I had a similar problem a month ago. Are all your Exchange servers and DC/GC in the same subnet (swirtch?)

Exchange, unfortunatly, Still uses browsing to look for the DC and GC. Is browsing working on the exchange server? Can you map to the DC/GC and can the DC/GC map back to the exchange server using netbios names? If it doesnt, then fix that problem first. To troublshoot browsing, use the browstat.exe included in the support tools.

Exchange Server 2003 needs to use the local system account to run.

check here too

http://support.microsoft.com/default.aspx?scid=kb;en-us;283257

by jguasch

I would also like to add that my problem started when a firewall1 server was placed in between my LANs by our network guy. Server 2003 with Sp1 has new security features that Firewall1 does not like. We had to upload a new rule (fix) from firewall1 to allow windows 2003 service with Sp1 to pass trough the firewall and connect to other DC/GC's..

by jrharris04

Thanks My Ex2k3 server is on the same subnet as one of the GC and DC. I was able to get it working by dropping my Ex2k3 server to a workgroup and then have it join the domain. I still have an Ex55 issue and I think it is WINS related so I will try to map to my DC with the NETBIOS name and use Browstat. It has been so long since I have used NT I forgot about Browstat!

This discussion is closed to new replies.