Discussion Locked

System Partition on a Compaq ML530

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all,

I will setup an NT 4.0 server on a new Compaq ML530 with a 5300 Array controller.
I know that in the past there was a limitation on how large your system
partition can be (4 GB or 7.8 GB)depending on the translation of the drive.
Do you know if this is still true with this new controller?

Also some documents on Compaq's web site recommends to setup two logical
drives - one for the system partition and another one for the data
partition. They mention performance and so on for this setup. Any thoughts
on separate logical drives versus one logical drive with multiple partitions?

Thanks

Alex Scortzaru

7 replies

by spydergst1

NT4 is limited to a 4GB partition. NT4 enterprise (I think) can go up to 8GB. So, It's necessarily the array controller which is limited but the OS itself is. We have 400+ servers here and we always allow smartstart to create the 36MM system partition. We then crates the second partition with 2 logical drives. A 4GB (c:) logical drive for the OS and a **** (d:) drive for data. This helps to pevent the C: drive from running out of free disk space which will become a problem at some point if you do not create a data drive. In some cases we might even put the pagefile on the d: drive to pervent lack of free space on the c: partiton and server crashes.

by frobo

Hi,

iv?e installed many comapaq Server?s (ASE)and i would recommend following:
Raid 1 for internal Drives with one logical Partition. There is no need to create more ogical Partitions, when i could create four Partitions on one drive(Logical Partition from Array).

If i have to create 6 partitions(Customer want that sometimes) then i create two Logical Partitions, cause of the limitation of the MB-Record.

Frobo

by tony.colgrove

As answer 1 stated, its not the controller, its the OS. When NT is being installed the setup program will create a FAT partition, which 4GB is the max supported (vFAT, 64K clusters, Win9x FAT limit is 2GB, 32K clusters). Even if you choose NTFS, it is first created in FAT then converted to NTFS. This limitation is in both NT4 Server and Enterprise.

This discussion is closed to new replies.