Discussion Locked

System Reboot Problems

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am running an AMD K6-III 450 on a tmc TI5VG+. The motherboard has been upgraded but problem was present then as well. The problem is that the system just restarts, no warning screens or errors just a reboot. The problem occurs in both win98 and win2K but more in the latter, esp when running matlab and alpha5. Does it sound like an over heat problem with processor or maybe a power supply problem. Any ideas would be useful as the problem is just getting irritating (not that it is getting worse with time)

5 replies

by admin

Could be a power supply problem. If you can get your hands on a different supply, I would hook that up and let it run a while and isolate whether or not this was it.
Also, I would unhook the reset switch lead on the motherboard and see if that stopped it. Then I would check the power switch on the case if it's an AT.
There are actually a lot of things this could be, but this will get you started troubleshooting. It's important to start isolating what it is not until you find it.

by frescalus

I had a similar experience about 8 months ago where my computer was randomly rebooting on startup. I would turn it on, then at random times it would reboot on it's own and sometimes twice in a row.

Here are some things to work out:
1. Flash your BIOS - go to your vendor's website and look for a BIOS upgrade. If that doesn't help...
2. Try and upgrade your memory. Some radom reboots are due to lack of memory. If you update your RAM you should see a difference. If that doesn't help...
3. Check your power supply. Your manual for your motherboard should give you a minimum specification on the type of power supply you should be using. If that doesn't help...
4. Do the Microsoft Dance and do what the Bill Gate's Disagreement Act of2000 tells you to do --- reformat the hard drive and start from scratch!

Hope that helps!!!

Neil

This discussion is closed to new replies.