Discussion Locked

TCP/IP

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am configuring a laptop for dial-up networking. That part was a success. The problem I'm having is getting IP to work. Once I authenicate through our network after dialing in, I should receive a DHCP address. If I try to ping a server, I get amessage about Windows Socket Interface error 0, or if I type winipcfg, I get failed to initialize Winsock. I have un-installed and re-installed IP. Ran some Winsock update for Win95 and for what it was worth, tried re-installing Dial up networking. Any suggestions besides reloading Windows?

7 replies

by paul majestic

What version of windows 95 is it? If it's a or before a then winsock might have to be updated. i hace seen a prblem like this and you might want to try removing all instances of TCP/IP and other network components. If all else fails you might have to re-isntall windows.

by shmaltz

Another option is to update Dial Up Networking. Go to microsofts web site and download the latest version of Dial Up Networking (DUN). I think the latest version is 3.1.

by nabess

Before you uninstall anything again, check to see if you have a file on your system called "ws2bakup.bat". If you do, you have a winsock version problem. By going to the command prompt and typing: c:\>cd\windows\ws2bakup
c:\windows\ws2bakup\ws2bakup.bat
c:\>exit

it should remedy itself. If you are unsure about this process, go to http://support.microsoft.com/support/kb/articles/Q191/0/64.ASP

Hope this helps you.

This discussion is closed to new replies.