Discussion Locked

TCP/IP on Home LAN

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My LAN works fine with Netbuei but I am having problems with the computers seeing each other using TCP/IP. The IP addresses are using network ID 192.168.0.X with a 255.255.255.0 subnet mask. There was a time I could ping the addresses of either computer from the other but now ping times out. Any ideas?

9 replies

by kgosnell

This is just a guess , you might have a virus/worm that has changed the address , and written it so it appears the same as before , the fact you haven't rewritten the settings and the Ping times out suggests it simply is not geting there, IE wrong address.
try another address setting and see if it occurs again . But first and formost , deep scan for a nasty.
Hope you resolve it.

by earnest

Question?: Can the pcs ping themselves? Can they ping 127.0.0.1?
Can you access the internet? Can you ping anything on the internet from either pc? What does winipcfg report? Does it match what you configured? If using a modem to connect out to internet and internet dialup connection is dhcp, then do winipcfg after you are connected. Can you ping any other address on your new dialup network?

Hope these ? help solve your problem,
Bo

by diplomat1

It is not that complicated. I am using DSL to connect to the 'net and both PCs work fine that way. It is the internal LAN I have a problem with as the computers are not seeing each other. The PCs can ping themselves and also 127.0.0.1

by pvp

I've had the same problem at home for 3 reasons (not simultaneously [whew]):

1. Bad ethernet connection (cable or connector).

2. NIC died.

3. User firewall. My son got one up but forgot to let the household in. I found out when he asked why I was pinging him (my ping was timing out).

by diplomat1

Seemed the problem was the firewall as it was not configured properly. After configuring, I was able to ping the PCs. Thanks.

This discussion is closed to new replies.