Discussion Locked

Terminal server vs rras

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are implementing a server with rocket modem 2 which will receive point of sale information from 3 stores via dial up connection. Should we use terminal server or rras and give step by step instructions for your choice.

5 replies

by erikdr

Depends on the app. If data exchange from POS to head office can be done in batch mode, dial-up and RRAS is the way to go. Only pay the phone bill for the few data exchange slots during the day.
If the staff at the stores need online access to HQ, and really also need to retrieve data interactively without batch access, TServices are the logical route.

Step by step for Rras/Batch:
- Install RAS on W2K, and add one user account with limited rights per store
- Create a DUN connection on thestore's PC's. Set to disconnect after 5 minutes of no access.
- In the scheduler of the workstations, add jobs which send/receive the collected data. This can be done by simple NET USE's to the servers RAS shares and then COPY.
The DUN connection will auto-dial as soon as the job needs the remote share, and terminate 5 minutes after the last COPY. Of course, further processing is inside your applications.

Have fun,

- The Netherlands

by maxwell edison

Greetings,

I would use RRAS, Routing and Remote Access Server. The following article will show you how to configure Windows 2000 Server to accept incoming calls from your users. It also shows how to configure different clients so they can dial into your Windows 2000 Server.

http://www.8wire.com/articles/?AID=2436

(REMOVE SPACES if they snuck into the pasted URL)

Good luck,

Maxwell

This discussion is closed to new replies.