Question Locked

Toshiba A-30

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My A-30 Satellite stopped working and giving me messages about ntoskrnl.exe being corrupt.

I have run the Toshiba Product Recovery CD-ROM and when I then try to boot I get "A disk read error occurred. Press CTL+ALT+DEL to restart" and the machine goes in a loop.

When I then instruct the machine to boot from the CD-ROM/DVD Drive and insert a Windows XP Home edition disk it will run Windows Set Up and eventually give me a message:

"The file ql1240.sys is corrupted. Press any key to continue."

followed by "Set Up Failed. Press any key to restart your computer."

How can I resolve this?

2 replies

by oh smeg

And make sure that it's both clean and doesn't have any scratches on the Surface.

If it's dirty you can clean it with the proper CD Cleaning materials but if it has scratches on the surface you need to have it professionally looked at to remove these and allow the Disc to remain readable. The good news here is that DVD's have become so popular and the places that rent DVD's are so common they all have the machinery to clean DVD's and a CD can use the same machinery to clean up the Disc and remove any light scratches that are on the surface.

If that doesn't work you'll need to look at the Optical Drive as it's not reading the CD correctly so it may need replacing.

Col

This discussion is closed to new replies.