81 replies
by japfingsten Accepted solution
by vogelboy Accepted solution
by japfingsten Accepted solution
by langlier Accepted solution
by bigbadbrown Accepted solution
To Whom This May Concern:
You know what? It seems like in reading this message you've had the same problem I have right at the very minute. I bought my Toshiba Satellite A135-S2276 from Best Buy. One night I was playing my Chessmaster 9000 game with the mouse on the actual laptop. I was already booted into Windows Vista Home Basic. When I went to put my USB mouse in, all of a sudden, it just froze up. When I tried to hit Ctrl-Alt-Delete, it wouldn't do anything. I held down the power button and restarted. When I did, it brought me to the BIOS password. So now to answer your question, since I'm a computer technician myself, the first option was to flash the BIOS. The second option was to get a utility that will reset the password. The third option is to replace the motherboard. When you can't change the password, you have to just break down and replace the motherboard. Here's my concerns: If I crack it open, I lose my warranty because they think I've been tampering with it. About the best option you have since you're still under warranty is to just take it to a Toshiba authorized dealer and let them justifiably figure out the problem. The default password for the BIOS is phoenix. Phoenix is all lower case letters. Another thing you can do is as the system is booting up, right before you get to the Toshiba splash screen, you have to tap on the Shift key. If neither of those options work and you don't have something to crack the BIOS password, unfortunately, you're shit out of luck. Final solution: Take it back to the Toshiba dealer and let them figure it out. It's less of a headache unless you feel luck. That's what I plan to do with mines being that a 2 or 3 month old laptop should work like a champ.
by angelopc Accepted solution
by older mycroft Accepted solution
"Power unit off. Disconnect AC power. Remove battery..... ...Short solder JOPEN1 solder pads for 30 seconds."
Pardon me but don't you need power to create a short?
by angelopc Accepted solution
When you disconnect the battery and the AC from the laptop, how do you think it keeps the correct time?
Regardless of power, a short is just a condition which represents a path for current.
by parkerwa Accepted solution
by jescobedo1 Accepted solution
by wafu Accepted solution
Im sure its easy to do, but do you want to void your warranty? Just send your notebook to a Toshiba service center and let them do it.
* wag na masyado pabibo..
by tony.larratta Accepted solution
This is the working repair took 3 minutes. Dont waist time on the other posts. Its quick painless and simple think about it no power to board just bios battery. Worked like a charm. wish all posters knew what they were doing
Thanks again angelo!!
by buttzilla Accepted solution
by berokin Accepted solution
by noordinia Accepted solution
by thmfic97233 Accepted solution
did what you said took a few times but hey IT WORKED!!Then I d/l'd the fix from toshiba in hopes it wont happen again but if it does Thanks to you Im ready.
O U T S T A N D I N G!!!
by dthomasak Accepted solution
FNA Angelo. Had her fixed in under 5 minutes!!! That's what forums like this are all about, sharing information on fixes for POS's like these laptaps.
Kudos!!!!!
by gattoni Accepted solution
Dear Mr. AngeloPC,
GOOD: I connected JOPEN1 with pin 1 and the laptop, like a Phoenix bird, born once more. No more need for BIOS password. I need 60 or more seconds to have the CMOS battery completely discharged. This is the good new.
BAD: After this I was preparing to update BIOS as recommended by Toshiba, but the machine locked the mouse cursor on the desktop screen. No overheating, no CTRL-ALT-DEL and I needed to press Power On button some time to have the machine OFF.
When I tried to Power On the laptop nothing occurred. The Toshiba logo (in red) doesn?t appears, the HD led flashes for 1 or 2 seconds and the machine is stopped. Nothing on the screen. Nothing, nothing, nothing. I tried a lot of procedures (with battery, with no battery, with power and battery, with memory cards, with no memory cards, I jumped the JOPNEN1 once more... but nothing gone to be good.
Could you help me?
Thanks in advance.
Hugo Penido Gattoni
Brazil - MG
by bigjohn.18082 Accepted solution
I had the same problem on my A135-S2276 about the BIOS password showing up.. AS Angelo PC said I short the JOPEN1 and rebooted... i reset the password log into vista everything works fine until after a few minutes it freezes... So i forced it to shutdown and tried starting it and nothing...
No Toshiba logo, no fans running, the DVD drive doesn't eject. Just the power LED, and Battery LED is ON. I tried it all. Finally i think i'll have to take it to toshiba which is miles away. Damn.....
by cjskerkis Accepted solution
by clewandow Accepted solution
by rgjr61 Accepted solution
It worked. I know these tips provide info that some do NOT want circulated. I too suffered the mysterious password error with my Phoenix BIOS and I again have access thanks to your tip.
Robert G
by cjskerkis Accepted solution
by liatris77 Accepted solution
by oh smeg Accepted solution
The BIOS is Incomplete and you [b]Can Not[/b] recover it. You Have to send it to a Authorized Service Agent to have the M'Board replaced.
Col
by tejakris Accepted solution
Hi Angelo, u r the man..
Very good instructions, it worked for us in first time itself. Thank you
by ravenrip Accepted solution
by year_old_redneck Accepted solution
by freelong1 Accepted solution
by fdxtech Accepted solution
You just saved me hours of messing around, and probably $100+ if I had to send this thing in. Thanks a million dude.
At first I thought "Oh right, I'm going to open up my Laptop and find this Jwhatever1 and short it with a screwdriver?! WHAT? No way!"
Then I read more here of people who did it. And it was just that simple. I used a flat screwdriver to connect the two sides of the pad for 30 secs or so, and viola! I am back up and running.
by dos989 Accepted solution
by older mycroft Accepted solution
What do you reckon, based on your ob(li)vious techy stance, would be the effect of a thirty-second short on a rechargeable battery?
What state of charge would it contain after such a procedure?
What ability to retain a charge would it then possess?
Would it still function as a battery?
Or is there a risk that the electrolyte might just happen to go for a walk?
by robo_dev Accepted solution
by jebabione Accepted solution
by perspektif_dimensi Accepted solution
what I can ask the password of phoenix of bios toshiba
satellite A153-S2276 ???
please....!!!
by ruffman Accepted solution
by esmaglalang Accepted solution
by dewayne.smith Accepted solution
by purplecrazy1969 Accepted solution
by tsayyah Accepted solution
From a previous post, I saw the comment on shorting the Jopen1 which is located by the IDE controller chipset. 99% of anyone attempting to do so will void the warranty since 99% will short the IDE chipset and cause the laptop not to boot the HDD (it will get recognized in POST yet it won't boot).
Be careful and that's what will definitely void your warranty if attempted.
by encore4k Accepted solution
B4 u all go opening up your laptops and removing this and shorting that (and all that tech stuff normal people like me dont know about) Toshiba have created a download for those of us who havnt had this problem yet.
But if like me you do have this problem (my laptop is only two days old and froze after i plugged my ipod in and then upon resseting it asked for a password), then apparently you can send your device to a authorized toshiba repair shop and they will fix it free of charge.
Go to the website and check tech support. I dunno how long it will take to fix...but its only a password.
by thmfic97233 Accepted solution
I tried once,then twice then with the power button depressed and nothing.I realized i was touching the solder joint and not that little square one one side(on mine anyway)so try #4 counted to 30 ,didnt expect to much but YEAH! IT WORKS !!
I then downloaded the fix from toshiba hoping it wont happen again.But if it does,thanks to you I'm ready.
OUTSTANDING!!
by stephenrossr6 Accepted solution
by jroddublr692000 Accepted solution
by dempsey Accepted solution
by dempsey Accepted solution
Ok, took me a while with the photo. trying to take a picture of such a small area and getting it to come out even half way clear is difficult. took 3 different cameras and several takes but my daughters new kodak 8megapixal did the trick. hope this photo is helpful to others in identifying and resolving this issue.
once again the link is denvereldridge.com/solderjoint.jpg (I hope no one thinks I'm trying to promote my website. I have no reason to since it's mostly stuff about me and my family. Nothing for sale.)just in case my this will make the link clickable solderjoint
by jimmy.tanjung Accepted solution
Could you send me a picture of the procedure to short JOPEN1 on my laptop?
Highly Appreciate
Kind Regards
Jimmy
by dempsey Accepted solution
by thebigman007 Accepted solution
After being very upset, I decided to help others that may have gone through what I did. I did a lot of research and was lucky enough to have found this forum. However, since it was lacking pics of the repair, I decided it was my duty to take care of this. Also, I felt the repair explanation was a little "above and beyond" for some of its readers (hopefully you have some technical background if you are going to perform this repair, I'd recommend you should!!!).
When previous posts said: "Short out JOPEN1" it simply means discharge/drain remaining power in the circuit. Simply connect these two points with some kind of metal. This will connect these two points and cause a "Short"; to occur. You can use two screw drivers, a needle nose pliers, or simply a tweezers. Good luck!!!
Once you have fixed this bios password issue, here is the link for page that has the bios update.
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1858470&moid=1596141&rpn=PSAD6U&BV_SessionID=@@@@0633562267.1199678618@@@@&BV_EngineID=ccceaddmmhdiejhcgfkceghdgngdgnn.0&ct=DL&all_docs=false
Here is the downloadable link: http://cdgenp01.csd.toshiba.com/content/support/downloads/sa130d6v140.exe
Here is the link for the photo: http://www.flickr.com/photos/22641186@N08/2174316598/in/photostream/
by dempsey Accepted solution
by thebigman007 Accepted solution
by monzol Accepted solution
by abambo Accepted solution
Yes this has worked but the performance is poor,but however many thanks to you guys.
HN
by dragon010101 Accepted solution
by fireman_103 Accepted solution
by fatemehtorabiasr Accepted solution
I have the same problem.Is your laptop repaired or have3 you found a solution?
I'll be thankful if you tell me how.
by dempsey Accepted solution
by bigjohn.18082 Accepted solution
Advice... I had the same problem on my A135-S2276 about the BIOS password showing up.. AS Angelo PC said I short the JOPEN1 and rebooted... i reset the password log into vista everything works fine until after a few minutes it freezes... So i forced it to shutdown and tried starting it and nothing...
No Toshiba logo, no fans running, the DVD drive doesn't eject. Just the power LED, and Battery LED is ON. I tried Changing memory module, removing battery, running with power adapter and withput batteries. Finally i think i'll have to take it to toshiba which is miles away. Damn.....
Any advice please help..
by monzol Accepted solution
by dempsey Accepted solution
by ze.no Accepted solution
I had performed the exact operations as mentioned in this post (Shorting the terminal which looks like letter U of JOPEN1 to the Silver 1/4" post which is connecting the motherboard to the laptop casewith with a metal paper clip). When I powered on the laptop, Nothing happened: No Toshiba logo, na fans running!!!!
Damn..... Any advice please send me email to ze.no@hotmail.com thanks.
by dempsey Accepted solution
It's been a long time since this issue first came up. I just wonder how many have successfully corrected the problem by shorting these post without any new problems occurring afterwards? I took mine to a Toshiba service center and from my conversation with them I believe they used the same method. But, after fixing the prompt error my usb ports went defective. They had to replace my motherboard! Lucky for me this all took place with only 2 weeks warranty left. So it leaves me wondering if there is a true fix to begin with or should the motherboard have to be replaced in the first place?
PS:ZE.NO--I notice you said you shorted to the U and 1/4" post? According to a photo that was sent earlier that doesn't sound right. In the photo the arrows are pointing to the U and the first short solder connection just above what looks like an arrow on the motherboard itself. But, as I said, I'm not sure it any of this will resolve the problem. It's my opinion that since this error is a glitch in the motherboard Toshiba should be fixing it free of charge whether or not the warranty has expired. Also, I would not advise anyone else to short those contacts unless you are 100% that it is the correct method and you are in deed shorting the correct contacts.
by condorfierro Accepted solution
OK GAYS IT?S QUITE SIMPLE, YOU MUST MAKE THE SHORT, YES BUT MAKE WITH THE LITTLE SQUARE AND CONNECT IT TO ANOTHER METAL WHICH MAKES GROUND, USE THIS WITHOUT THE BATTERY PLUGGED, AND REMEMBER TO MAKE THIS FOR 30 SECONDS, AND IN CASE THAT YOUR ENTIRE MACHINE GOES OFF DON?T BE IN PANIC, TRY IT AGAIN AND AGAIN FOR MORE TIME, OK.
SORRY FOR MY BAD ENGLISH I ?M SPANISH
by ze.no Accepted solution
by arosales Accepted solution
Hi, I noticed all this issues are with the model A, I have a P205D, and really need to reset the BIOS but this laptop does not have anything to short under the memory area, also i checked the other link that shows how to rest it opening the keyboard area and this one does not have the same structure.. can anyone help me? The model is: Satellite P205D-S7208
Issue: I have no access to the Keyboard averytime i start the laptop, I have to wait and put the laptop to sleep then hit power button and when it comes back the keyboard works!... this is very annoying, i have windows XP and Vista (dual boot) and it happends in both OS.
by Former member Accepted solution
Without knowing your computer inside and out, then you try to do a fix, but you do not know what pin is what then your computer will go done the stop road. Please get reading material so that you can read up on the pins in question. If you do this fix and do not know but just guess then the out come will be a computer that goes to long sleep. You do the fix at your own risk.
Enough said i think, reading through the posts on here make me laugh. :) :) :)
Please post back if you have any more problems or questions.
by bartha_stefan Accepted solution
by sak140 Accepted solution
Unfortunately I did not find this post and got screwed - $190. I feel like a chump!!!
The ASP (who should have done it for free) got my system working but the BIOS is still the old v1.10. The updated version for this computer is v1.4 but its for VISTA. I gave up on VISTA and went back to XP. Anyone know what version I can use for XP?
by legacy7x Accepted solution
by jimmy.tanjung Accepted solution
Could you send me a picture (how to short JOPEN1)?
Please....
Warms Regards
Jimmy
by older mycroft Accepted solution
The guy wasn't interested in 'shorting out / clearing out' the EEPROM.
He was asking how to get rid of the BIOS password.
As you should already be aware, the password is no longer stored in the EEPROM, so shorting out or denial of battery power will achieve nothing other than a reset EEPROM.
Also, had you taken the time to notice WHEN the question (that you never read) was posted, you'd have realised the OP has probably retired from active service by now, let alone returned from his tour of duty!! :D
by seanferd Accepted solution
I don' wanna...
Almost forgot.....Zombie!
It will eat our brainsss.
by older mycroft Accepted solution
That (thankfully) I've never heard about.
How else do these folk find all these ancient artefacts that once were active threads ??
[i]Maybe because they're just [b]THREADS[/b] they get mistaken for artefacts[/i]
All we need now is an "Indiana Jones" avatar! :^0
by mayosoft Accepted solution
RE: batteries and EEPROMS.
They store their data by holding gates in position. When the charge that holds the gates is dissipated they revert to the original states. All 0's, when the computer is turned back on - if the state is all 0's, data is read from ROM bios. (Small flatpak chip with leads on two sides.) into EEPROM.
This procedure below can be done on most Toshiba boards made by HANNStar (the blue boards). Remove Battery, Hold power button for 30 sec. Plug in AC while holding power button. (The lights should flash, or stay on about 10 sec then go off) Release Power button. Put battery back in, and turn on normally. That too is a method for reloading EEPROM data.
Newer laptop hold data in a 8k area in the keyboard buffer. This is one way is the most secure and difficult to remove. (usually on the DualCore/CoreDuo chipsets)
Again, the method mentioned previously does work. Clearing the CMOS does remove the BIOS password. Shorting/draining the charge on the EEPROM does the same.
by thumbsup2 Accepted solution
by seanferd Accepted solution
works every time.
(Where is the thread now?
It's being examined by top men.)
by older mycroft Accepted solution
by seanferd Accepted solution
Maybe found via the old "People who read this also read..."
Been caught by that a few times myself.
Almost as old as Jaqui!
by seanferd Accepted solution
1) Find out or remember the password.
2) Contact Toshiba.
by santeewelding Accepted solution
The resurrection part, I mean.
I noticed back when that TR shows up a lot on general searches. It's what got me sucked into this asylum.
by krowran Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
