Discussion Locked

Transfer of large amount of data

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Will transfering large amount of data through a 10/100Mbps card to another via HUB cause a reboot? Mine did.
Had checked the IP address and installation to be in order. No, IRQ or resource conflicts.
Intel PIII 733MHz 256Meg SDRam Azus 815E motherboard Win98SE 300W powerunit 3 Harddisks & 1 DVD ROM.

7 replies

by joe prochazka

I never had any problems doing it.

I would venture to say that you possibly have a network card that is starting to go on you. I've had a few network cards go and cause reboots from out of the blue on a few of my systems. I'd say try swapping outyour current network card in the machine your having this problem with and putting a new one in and see how that goes.

by rogerndgreen

I have seen large file transfers (particularly over slower connections) sometimes momentarily lose and then pick up the network connection.
If you PC BIOS has WakeonLAN enabled, this can cause a reboot.
Personally, unless you absolutely require a WakeonLAN facility, I would disable it in BIOS. I have had a PC refuse to boot up because the LAN card hard gone belly-up (even though it wasn't connected to a LAN at the time).

Roger

by kgosnell

If you have no one to reset the onboard cacheing size protocol , you will have to break the data into smaller pieces as you ran out of memory, next time when copying material of such a large nature , put it into a file on you hard drive , then transfer the folder , but before you do send ,copy a word into a text file to empty the clipboard , and clear out the C:\Windows\Temp folder , as this is used for temporary storage of data transfer under certain conditions , once you see that the problem is resolved , have your tech automate the cleaning process so you can simply click a icon and get on with life ( and don't forget to run disc cleanup if you are accessing the I-Net often , and reduce the size of that temp file too)

This discussion is closed to new replies.