Discussion Locked

trouble in pc

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Sir, I have intel celeron 400 mhz,and 810 chipset motherboard oftenly I start my pc talke long time and its show me blank screen.when its start there date and time is wrong then I manualy set but when i shutdown pc again he wrong date and time when I check the BIOS there is show me in CPU SPEED MHZ: 133(66*2) what is meaning .and also show me stnd cmos setup the primary master is AUTO. its auotmaticly detected the hard disk (hard disk is 20 gb)
thanks

7 replies

by dmiles

Change the CMOS battery,this may solve your problem.
66=[External clock speed] x 2.0 [clock factor]=133 internal clock speed that CPU operates at.
66 also refers to bus speed
Celeron is based on a 133MHZ CPU
The Auto detection is default settingthat BIOS will automatically detect drive information

by david balogh

The above answer was right about how to work out the clock speeds...

BUT, the Celeron is "_NOT_" based on a 133Mhz base... yours especially (cos I had one myself) is a 66Mhz X 6.0, and thats what bios should be set to. Now the newer celerons are based on a 100Mhz base but not yours...

hope this helps,
David

by bergerpeat

Hi, Maybe it is your BIOS battery that is not enough charged and your BIOS forget your setting. May be your mother board have a problem. I had a somputer that was long to start and one day it was not starting anymore. That was the mother board.

This discussion is closed to new replies.