4 replies
by passiveaggressive Accepted solution
by oh smeg Accepted solution
But if ti is how to get the HDD size back provided that you originally had a 500 GIG HDD and not something around the 15 GIG you need to wipe the HDD with a Utility like Kill Disc
http://www.killdisk.com/downloadfree.htm
Then proceed to reinstall the OS.
But if you replaced a 15 Gig IDE Drive with a 500 GIG Drive that is a completely different story. You will need to look in the BIOS and see if the Drive is correctly identified and save the changes as you exit the BIOS. Most likely however the Drive will not be correctly identified as it is too big for the BIOS and in that case you will need to add a IDE Controller Card that can support a 500 GIG HDD and then install your OS from there but when the first Blue Screen Appears you'll need to press the [b]F 6 Key[/b] and when prompted insert a Floppy into Drive A with the Controller Cards Drivers copied to it's Root.
If you don't have a floppy Drive available you can make a Slipstreamed Install Disc with something like nLite available here
http://www.nliteos.com/download.html
and include the Controller Cards Drivers as well an any other items that you wish to. Just make sure to read the instructions for this program here though first.
http://www.nliteos.com/guides.html
Also if you do not have a XP SP2 or latter Disc you will need to slipstream SP2 to it as prior to SP2 the XP Installer could not format a HDD bigger than somewhere around the 137 GIG Mark. ;)
Col
by pctechmike33 Accepted solution
by balge Accepted solution
hi
the small partition is a recovery partition not system partition try installing on the system partition?
cheers
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending