7 replies
by rudolph(uk)
Let's say that you want DomainA trusted by DomainB (trusting)
-Logon to PDCA as administrator
-User Manager for Domains
-Policies - Trust relationships. Trust relationship box appears. In the Trusting domain box click Add. The trusting domain box appears. For trusting doamin type in DOMAINB. Type in a password and retype it. Click OK.
Now go to PDCB, logon as administrator.
User manager for Domains, Policies, trust relationships.
The Trust Relationship dialog box will appear. In the trusted domain box click add. Add Trusted domains dialog box appears. For Trusted domain type in DOMAINA. Type and retype password. Click OK.
As a general rule, work always first in the trusted domain setting the trusting domain and then go to trusting domain and set the trusted domain.
Good luck.
by latifatanda
by azizhakim
to set up trusts three prerequisites are necessary.Since you know how to configure trusts and which order we will concern with the prerequesites.
1)Common protocol & both pdc's online.
2)Since communication is through rpc a dedication permanent connection is required.
3)both pdc's must resolve netbios names.Number 3 is perhaps the most common trust relation error.I would use either wins or lmhosts to resolve & recreate trusts.Good Luck
by latifatanda
by trupit
A few things can take into affect here.
1)You will always be able to set up a trusting domain with out a problem. The trusting domain is basically an annoucement that it can be trusted.
2)Once that is set up, when you try to set up the trusted domain, do you get an error message. Perhaps one saying "Controller for this domain could not be found".
3)Do you have a firewall in place between the two DC's. This may also cause a problem is the trusted domain is inside the firewall, especially if it is Novell BorderManager.
Please give more infomation in the set up of your systems.
Thanks
by latifatanda
by latifatanda
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending