Discussion Locked

Trust Relationships

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I want to create a trust relationship between my two domains which are connected via leased line. The first domain has a subnet of 192.168.100.0 and the other domain has a subnet of 192.168.200.0.

I already tried doing it but I got an error message "Could not find domain controller for this domain."

Please help. Thank you.

7 replies

by dao251

before establishing trust relationship you have to make sure name resolution works between your networks. Actually, you need only domain controllers' names be resolved in the other network.
In case you use WINS in the two networks you may want to either setup wins replication or just add static records for servers from the other network.
You may also add corresponding lines into LMHOSTS files.
I anticipate allowing broadcast resolution over your leased line is not an option.

HTH,
Dima

by green lantern

Add the distant domain's PDC in the LMHOSTS file on the local PDC. Working on the local PDC, ping the distant domain's PDC using its name not its IP address. Once you can do this then open User Manager for Domains and setup your trust.
Under policies/trust relationships go to the trusting box first. Remember the password you use. Give the system a minute or two to acknowledge the setting then have the distant domain establish a TRUSTED domain. When prompted for the password enter the password above. The hardest part is establishing NetBIOS name resolution User Manager requires this for your setup. You might have to setup a WINS server first.
ralph

by joseph moore

Trusts are a lot harder then they at first seem, IMO. I went through this a couple of months back. Trying to set up a trust between 2 domains with a lot of distance between them.
So, here is all I did (and it is similar to what is listed in the above comments):
1. Both domains ran their own WINS Servers. Set the two WINS servers as push-pull Replication partners. (both PDCs must be WINS clients also)
2. Add each PDC and the domain in the LMHOSTS file of the other. (don't forget to NBTSTAT -Rafter changing LMHOSTS for the changes to take effect)
3. Add the ExpectedDialupDelay Registry entry in both PDCs. (technet article #Q163204)
4. When you finally do the trust itself in User Manager for Domains, I had to use the Domain Administrator password for both domains whenever I added THEIR domain as Trusted and Trusting. And they did the same for me on their domain: added my domain name as Trusted and Trusting, but they used THEIR Domain Admin password.
I no longer have the TechNet articles that told me to do all of these things. Each step was in a different one on domain trust.

Hope this helps

This discussion is closed to new replies.