Windows Forum

Ask something
Discussion Locked

Turtle Beach Sound Card

0 helpful
1 reply

by ihdanjr

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need help installing a turtle beach sound card. I believe the drivers are correct but I keep getting the constant message: Sound card has not been detected. The plug and play option has been disabled both in CMOS and device settings. Any help???
Irving

1 reply

by frobo

you are working with NT-Wks i guess, and your SoundCard is a ISA-Type (16Bit)?
Ok ! I don?t know which Type of Mainboard or which type of Bios you installed, but first
look for the Ressources on :

A. Jumper on Card for ressources like IRQ, DMA, Port ...
first look what free ressources you have, and then configure your card.

B. You have diabled the PnP Option, that means you must reserve the Ressources for your ISA-Card. Turn off the automatic ressource management for the PCI-devices, and reserve the ressources.

C. And now under NT \ Control Panel\ Musik dev.... just type in the sort of ressources.
Some card let you do this only during the installation, if so reinstall now the driver.

If it not works at all, try thecard somewhere else by a friend or so to be shure that it?s not defect.

Frobo

This discussion is closed to new replies.