7 replies
by bstei18
Setting up a second monitor should be very easy under 98/ME/2000. First, make sure you have a free IRQ. Install the second card in the free PCI slot (with power off of course).
Then boot the system allowing ME to detect the card and install driversas necessary.
A word of caution. You may need drivers specifically for Windows Millenium. 98 drivers may not work as I've found out the hard way.
After ME has installed the card you will need to restart the system. As the system restarts you should see a message that ME has configured the card and is ready for use. The prevous monitor should appear as normal.
Once the system has finished starting and everything works go to your display settings to extend your desktop to the new monitor and set its display settings. They don't have to match the other monitor.
If you've never worked on a PC you might want some help and remember to back up anything important first.
Good Luck.
by gknicks71
by jnlguy
by gknicks71
by dksj
by gknicks71
by gknicks71
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending