Discussion Locked

two network card in NT (routing)

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm setting up a msproxy, we have static IP address like 203 series IP address given by ISP. So I gave that IP address to inbuilt NIC and i add an another NIC and i gave IP address like 172 series now i want 172 series IP should route the internal internet connection ? How setup?

7 replies

by astute

Just one thought ....

U need not use proxy in case u have a multihomed server, just add a route entry like

route -p add 172.xxx.xxx.0 mask 255.255.0.0 203.xxx.xxx.xxx

& all the machines in u r network will use this server ip (172.xxx.xxx.xxx ) as their default gateway.

Good luck
sharan

by curlergirl

Please read my second post to your previous question. Assuming that you're using this proxy only for Internet access, as long as all of your internal clients are on the same 172 series subnet, you don't need to add any routing on your proxy server. Simply make sure your clients are set up to use the proxy server for Internet browsing - this is done through the Connections setup in the properties of Internet Explorer, or through Preferences in Netscape. Hope this helps.

by taiseermustafa

to access the outside (internet) from the Lan you should make sure of several things!!
If you are using DHCP and you have a router then:
1. Outside NIC should have:
203.xxx.xxx.xxy and the subnet mask for your class, default gateway(203.xxx.xxx.xxz) should be the router IP....
2. second NIC should have:
172.xxx.xxx.xxx and the subnet mask, but without default gateway...
3. You should enable IP forwarding in the Netwrok..

In DHCP manager you can define the router for your Internal IP addresses, which is in your case the Internal Lan card 172.xxx.xxx.xxx

I don't know if I am talking about known issues for you or not, but I will be glad to help if needed..

Good Luck

This discussion is closed to new replies.