Discussion Locked

Unable to boot my PC

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I can't boot my PC, there is this message saying 'please check the signal cable.'

I have checked the connection to the monitor and have also tried open up the CPU to make sure connection is ok, I have also checked the RAM to see if it's properly in place. I have done everything I could think of but still can't solve the problem. Please help. Thank you.

5 replies

by kelly_aitch

Wild guess - might have something to do with remote start capabilities of your NIC? Is there a small cable connecting your NIC to the motherboard? If so, try disabling the NIC's remote start ability - check the docs or the manufacturer's support site for details

Cheers

by s_peppercorn

Does the PC actaully power up (lights, fans etc?) If yes, then check that your video card is seated properly in the slot.

Check that none of the pins in the vga plug are bent.

If it is and you still get this message then try another video card.

It seems that your monitor is not recieving any signal from your PC. This is either because the video card is faulty or the monitor cable has become damaged.

This discussion is closed to new replies.