Discussion Locked

Unable to Browse the Network

0 helpful
20 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This question is a continuance of the previous two I've listed. This is a Win 95 machine, no matter what changes are made I get the message "Unable to Browse the Network." I set up a peer to peer between the problem machine(Dell Optiplex GXa - Win 95) and a Dell Latitude CP (Win 98) using a crossover cable. From the latitude I can see the problem machine & all shares. On the problem machine, no matter what changes are made in the network properties, I get "Unable to Browse the Network." I've verified adapters, services, & protocols over & over, verified the domain name, removed the NT Domain logon from both machines. I've disabled the integrated NIC & replaced it with a known working NIC. When attempting to sign on to the company network, "The domain password you supplied is not correct, or access to your logon server has been denied." I disable logon to NT domain, logon is apparently successful, but still "Unable to browse the network. Even if this machine is not physically connected to a network, and I sign on(no NT domain), the machine should see itself in network neighborhood. We are using a DSL for internet access, and this works on the problem machine, even with DNS disabled. The IP Address is OK as I can ping this machine from our server, and I can ping the server from this machine.
Any suggestions? (different or upgrade to the OS not an option)

20 replies

by phy

Have you tried doing a
nbtstat -a to see if the PC is registering it's NetBIOS services?

Check you computer name too, make sure you haven't got any white space at the end + try making it less then 15 chars.

by 3dad

Double checked the PC name, only 7 characters(users first name - small company), no blanks, beginning or end. Where & how would I do a "nbtstat -a "?

Please respond.

by jgastright

Try another crossover cable. You never know, sometimes if the ends are not crimped down very well, it will cause interference that some cards will not be able to overcome.
Also, You did not say you had file sharing turned on. Double check that.

by 3dad

I can verify the crossover cable works as I used it prior to & after this test, and yes, I also tested w/ a backup cable. I can also verify that file & print sharing is turned on, as I double, triple & quadrouple checked it as I feel I've tried every possible configuration. Also, everyone else on the network can see this machine & all shares.

by 3dad

Did not correct the problem, please see comments for more info.

Thank You.

by mpiela

Have you setup the problem with a user name. Do that in the control panel. Then log off and logon with the new user name. Then try to browse the network. Good luck

by mpiela

Have you setup the problem machine with a user name. Do that in the control panel. Then log off and logon with the new user name. Then try to browse the network. Good luck

by mpiela

How did you make out? Were you able to browse the network after you logged in with a user name? Let me know

by 3dad

Unable to browse the network. Please see the comments for more info.

Thank You.

by grantcom

Homer Simpson Instructor at Large has it right. The 95 Machine must be set to Browse Master...95 bug. Also, set all of the machines NIC manually through network properties....i.e. 100 BaseT or 10 BaseT whichever is appropriate and set to half duplex..or in your case with cross over, as I recall you can set these to full duplex...someone correct me if I am wrong on this. It is also a good idea to run winipcfg on all the machines and release and renew these cards. Finally make certain all are setthe Primary Logon to Client for Microsoft Network. If this does not do it the only other thing I can think of is to download all of the Updates to 95...seems I recall a Networking Patch and upgrade of several networking components.

by 3dad

Unable to browse the network. Please see the comments for more info.

Thank You.

by shanghai sam

I first thank everyone who attempted to help by taking the time to post an answer. Unfortunately, none of the proposed corrected the problem. There are two of these Win95 machines, the first we were able to setup with no problems. The second was theproblem child, and I was finally able to convince the IT director to upgrade to Win98se. Problem solved. The reason he objected to this originally, is these two PC's came out of a manufacturing press control system, and he wanted to keep them as is in order to have them as backup's for future testing, if needed. The Win98 upgrade can be removed, which in theory, when removed will restore the PC's previous settings. I discovered the problem to be an installation of IE5 upgrade from IE4. The first machine was functioning properly until IE5 was installed. After installation, this good machine acquired the same problem as the other. I believe there may be a patch available from Microsoft, but opted for the Win98se upgrade as the fastest fix(45min, runs by itself), rather than rooting around in MS's knowledgebase in hopes of a patch that works.
Again, Thank You for your time.

by 3dad

FYI, my comment was posted under the wrong alias("transient" should have been "Pytor"), I don't know how or why, but it was.

by 3dad

What the frick, now it says "User Deleted", again it should be Pytor.

This discussion is closed to new replies.