Discussion Locked

Unable to install OEM Win98 on clean HDD

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
What am I overlooking? I have a HDD that had Win95 installed. I FDISK the drive and format it. When I attempt to install the OEM version of Win98 I get a setup error that states I need to use an "Upgrade" version of Win98 due to the fact that the current OS is Win95. Should'nt I be able to intall the OEM version of Win98 on a formatted drive even though there was a different OS installed previously? Note: before doing all of this I did virus scan the Win95 drive and all files before doing any thing at all and it was clean. Thanks for any help given.

5 replies

by dklippert

Here are some suggestions. Type the Q umber in the search box at support.microsoft.com.

You also might try FDISK /MBR

How to Install Windows 98: Helpful Tips and Suggestions

Q188881

Error Message: Your Computer Already Has an Operating System Installed, Which Cannot Be Upgraded by This Version of Setup

Q225252

Windows 98 Second Edition Setup.txt File

Q232018

by shanghai sam

Thank you Dkippert for your help. Q225252 would only be helpful if the Win95 OS was still installed on the HDD. The Solution: I formatted the drive again, and while using the Win98 start up disk I made a Win98 directory on the HDD and copied all of the CAB files from the OEM CD to the directory. Still would get the same error when attempting to install from the CAB files. So I SYS the HDD with the Win98 start up disk and rebooted without the start up disc and then was able to install from the C:\win98\cab files successfully. After that proceded to upgrade with Win98se.

by thechas

Format the drive again with the /u switch.
format c:/u

That is the unconditional switch that forces format to erase the files, and not just the file table.

Also, is the primary partition set to active in fdisk?

Are you using a W98 startup disk?
If you do not have a W98 startup disk, that may be part of the problem.
You can download an image of the disk from www.bootdisk.com

Chas

by shanghai sam

Thank you "TheChas" for you help. I tried your ideas but to no avail. The Solution: I formatted the drive again, and while using the Win98 start up disk I made a Win98 directory on the HDD and copied all of the CAB files from the OEM CD to the directory. Still would get the same error when attempting to install from the CAB files. So I SYS the HDD with the Win98 start up disk and rebooted without the start up disc and then was able to install from the C:\win98\cab files successfully. After that proceded to upgrade with Win98se.

This discussion is closed to new replies.